[size=3]Have you ever encountered this situation at work? You wanted to use a serial port tool, but you downloaded several at the same time and found that none of them were very useful. Have you ever
[i=s]This post was last edited by flyriz on 2020-11-26 16:20[/i]Hello everyone, I encountered a very strange problem: As shown in the figure above, the two upper pins of STM32F767 are configured as th
In general, resistor networks are tested using one of three measurement methods:Standard four-wire Kelvin measurementSix-wire guarded ohm or delta resistance measurement“ Y ” type or buried node resis
Let's talk about the application process of TI samples first. 1. Open the TI official website and find the link to request samples. 2. New users need to register. You can register after selecting the
virtual BOOL ExtTextOut ( int x, int y, UINT nOptions, LPCRECT lpRect, LPCTSTR lpszString, UINT nCount, LPINT lpDxWidths ); I would like to ask if the parameter nOptions is valid? Through my own testi