Regarding the prompts that novices encounter when debugging or downloading, the first prompt is that the flash cannot be accessed, and then the prompt that the debug mode cannot be entered during debu
[i=s]This post was last edited by qwqwqw2088 on 2014-8-18 22:45[/i] [size=3][color=#0000ff][b]1. Preparation[/b][/color][/size] [size=3][color=#0000ff]I have seen TI's sample application activity on t
I am using MSPF1611MCLK=7.3728MHZ and now I want to generate a square wave with a maximum frequency of 2M. I wrote the program like thisvoid main(void){WDTCTL = WDTPW +WDTHOLD; // Stop WDTP3DIR|=0x04;
I recently made a board using STM32F103VB. When using 24C256, I forgot to add pull-up resistors. I finally put two 2.2K pull-up resistors on. As a result, I found that after I set PB10 and PB11 to AF_