Training

Location:Training / Hot Applications / Industrial Control / Automatic control principle stone group / 61

You can log in to your eeworld account to continue watching：
61
Login

Duration：1 hours and 3 minutes and 11 seconds
Date：2019/07/29

Uploader：JFET

Introduction

keywords： automatic control Postgraduate Entrance Examination

Detailed and practical "automatic control principles (including modern control theory) video tutorials" taught in accordance with postgraduate entrance examination standards! This series of video tutorials are all taught by Dr. Shi Qun of Tsinghua University.

You Might Like

Recommended Posts

Improved design of amplitude sum and difference single-channel single-pulse intermediate frequency tracking receiver: In the single-channel single-pulse automatic tracking system, the intermediate frequency tracking receiver, as the core control unit, plays a key role in the servo tracking performance of the antenna.; JasonYoo Power technology

Design and Writing of uClinux Device Driver: [size=14px] Design and writing of uClinux device driver Reprinted: Design and writing of uClinux device driver 1 General steps for writing device driver (1) Determine the major device number of the de; songbo Linux and Android

How to set I2C1 on GD32E230C development board?: I want to enable I2C1 and use pins PF6 and PF7. I configured the pins according to I2C0. The code is as follows: [code]void i2c_gpio_config(void) { /* enable GPIOB clock */ rcu_periph_clock_enable(RCU; hujj GD32 MCU

MCU51 learning routine: ;==================================================== ; Simple running light;=================================================== ; ; [b][b]mcu[/b]51[/b]experimental board supporting learning routine;; cqycmc 51mcu

F2812 external data storage 5045 circuit, can not store after power failure: I just came into contact with F2812. There is a 5045 storage circuit in the circuit. It could store data when the power was off before. Now after the power is off, the value displayed when it is turne; 沉默的12345 DSP and ARM Processors

Why is the output current 4 mA when the input is 24V?: The input voltage in the following figure is 24V and the output voltage is 4 mA. Please explain this schematic diagram; NJMKL Analog electronics

Recommended Content

Hot VideosMore

Hot ArticlesMore

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews

Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函

京公网安备 11010802033920号