Training

Location:Training / Hot Applications / Industrial Control / Automatic control principle stone group / 66

You can log in to your eeworld account to continue watching：
66
Login

Duration：1 hours and 8 minutes and 8 seconds
Date：2019/07/29

Uploader：JFET

Introduction

keywords： automatic control Postgraduate Entrance Examination

Detailed and practical "automatic control principles (including modern control theory) video tutorials" taught in accordance with postgraduate entrance examination standards! This series of video tutorials are all taught by Dr. Shi Qun of Tsinghua University.

You Might Like

Recommended Posts

How to burn FLASH and move the program (bootloader) of F2812: The "materials" required for the method of burning FLASH and moving the program (bootloader) of F2812: 1. A set of F2812 evaluation boards 2. DSP--CCS platform 3. A set of simulation products 4. Progr; Aguilera Microcontroller MCU

Relay knowledge help!!: I want to control a relay with a voltage of 12VDC and a current of more than 15A. Can any experts tell me what models can meet my needs?; lpf17 Power technology

WrongROMtableComponentID error occurs when debugging stm32: Yesterday, when I was debugging stm32, a wrong rom tablecomponent id error suddenly appeared when downloading the program. A dialog box popped up saying no cortex_m device found in jtag chain. I tried; qw12345 stm32/stm8

The input is 3.3V TTL high and low level. In theory, the output of Darlington should be the opposite level of TTL. I checked it...: The input is 3.3V TTL high and low level. The Darlington output should be the opposite level of TTL. I checked and it is always in the same state. What's going on?Also, the PMOS at the back end is alw; chuzhaonan Motor Drive Control（Motor Control）

Can a 4A constant current circuit be made using a 3-pole tube?: Please give me some advice.; 老夫子 Analog electronics

About the working principle of the peripheral interrupt response register in the 2407DSP interrupt system: The 2407DSP interrupt system is divided into two levels. In the first level, there is a peripheral interrupt request register and a peripheral interrupt response register. The principle of the periphe; 明镜台109 DSP and ARM Processors

Recommended Content

Hot VideosMore

Hot ArticlesMore

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews

Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函

京公网安备 11010802033920号