OnePlus 10T HD rendering: OnePlus's last flagship product this year has an appearance adjustment and configuration downgrade

      The latest news says that OnePlus 10T will be the last flagship product released by OnePlus this year. The company will not launch OnePlus 10 Ultra, OnePlus 10T Pro or other models. Currently, not much information is known about the phone, except that it is codenamed "Ovaltine" and is expected to use the Snapdragon 8 Gen 1 processor. Now, the whistleblower Yogesh Brar and Onsitego have collaborated to bring high-definition renderings of the phone.

　　The OnePlus 10T will have some design changes, with the camera module on the back extending to the entire width of the phone. However, the tipster also admitted that these renderings are based on early prototypes, so the design of the final retail version may be different.

　　Regardless, the phone is expected to be larger than its predecessor. Exact dimensions aren’t available yet, but the screen will apparently measure 6.7 inches diagonally, making it larger than previous OnePlus T-series models and the same size as the 10 Pro. However, it will have an FHD+ resolution instead of QHD+ (while keeping the refresh rate at 120Hz).

　　The phone will also charge faster than the Pro (80W), at 150W, but the battery capacity is slightly smaller (4800mAh), compared to 5000mAh on the OnePlus 10 Pro. Wireless charging is still not supported. In addition to the small reduction in the screen and battery, the reduction in the camera part is more obvious.

　　The OnePlus 10T will use a 50-megapixel main camera with OIS and 4K 60fps video recording. It will be joined by a 16-megapixel ultra-wide-angle camera and a 2-megapixel macro module. There will be no telephoto lens on board. The front camera will have a 32-megapixel sensor.

　　The 10 Pro has a large 48MP 1/1.43-inch sensor with OIS (we don’t know the size of the 10T sensor), as well as a high-resolution 50MP sensor in the ultra-wide angle (150° FoV) and an 8MP 3.3x telephoto camera (with OIS).