What are the operating procedures and precautions of the welding robot?

Welding is a process in which the welding program is preset in the robot and the robot automatically completes the welding operation. It not only improves production efficiency and reduces production costs, but also effectively guarantees the quality and stability of the weld. The following robot manufacturer Wuxi Jinhongying will introduce in detail the operation process and precautions of the welding robot.

1. Operation process of welding robot

1. Robot settings: Before performing welding tasks, the welding robot needs to be set up. This includes setting parameters (such as welding current, welding speed, etc.), as well as the robot trajectory. After the settings are completed, the program is downloaded to the robot control system.

2. Workpiece clamping: Install the workpiece to be welded into the fixture, and then fix the fixture on the welding platform.

3. Turn on the welding robot: Connect the welding robot to , press the power button to start the robot control system.

4. Start the preheating function: Before welding, preheating is required. This process is very critical. It can make the welding temperature more uniform, thereby enhancing the welding quality. After the preheating function is started, wait for the preheating time to end.

5. Perform welding tasks: After preheating, the robot starts to perform welding tasks. The robot works according to the pre-programmed program to ensure welding quality and stability.

6. Check the quality: After the welding task is completed, the welding seam needs to be checked for quality. This step is very important because any small problem will affect the quality and stability.

2. Precautions for operation of welding robots

1. Safety: Wuxi Jinhongying reminds everyone that since welding robots will generate high-temperature sparks, radiation, splashing and other dangers during operation, operators must wear appropriate protective equipment and ensure that there are no people or debris around.

2. Robot programming: The programming of welding robots is very important. When programming, each step must be carefully checked to ensure that the values ​​are accurate and the program is correct. If the programming is wrong, it may cause defects in the weld or even welding accidents.

3. Workpiece clamping: Before welding, the workpiece needs to be clamped to ensure that it is firm and stable. If the workpiece is not clamped well, it may cause problems such as welding position deviation or weld cracking.

4. Welding power supply: Welding power supply is a key component of welding robot and must be regularly inspected and maintained to ensure its normal operation and welding effect while ensuring safety.

In short, the operation procedures and precautions of welding robots are very important. Correct operation can greatly improve welding quality and efficiency, while incorrect operation may lead to serious consequences.

Review editor: Tang Zihong