"Compact spraying robot" can be so "rolling"

Through systematic research and observation of problems existing in general industrial spraying, such as poor consistency in manual spraying quality, large robot size, difficult installation, low paint utilization rate, and inconvenient integrated application of traditional robots, and with the company's experience in spraying applications in general industrial fields, EFORT has launched a new generation of compact spraying robot GR6150-1500.

My manual spray booth needs to be converted to automatic spraying, but the spray booth is only 2m wide. Can the robot fit in?

I am a Pad panel OEM. Is there a smaller robot suitable for spraying Pad panels?

The paint control system is too far away from the spray gun, so it responds slowly and wastes paint. I hope to integrate the paint control system into the robot body. Is that possible?

The GR6150-1500 spray robot is not only light and compact, but also has a flexible working space and high waterproof and dustproof performance. The positive pressure explosion-proof design enables it to flexibly cope with various aerosol and dust explosion environments. The lightweight body can support wall-mounted, ceiling-mounted and other installation methods, and can be widely used in automatic spraying scenarios such as automotive parts, 3C electronics, and hardware parts.

The GR6150-1500 spray robot has a hollow wrist structure, can carry 15kg of mass, can reach a radius of 1500mm, and weighs only 245kg. It can easily support any installation form such as ground installation, wall installation, ceiling installation, and tilt angle installation. The design of the compact installation base and semi-circular process arm reduces the installation area and reduces the interference with surrounding equipment, so that the GR6150-1500 can be easily installed in the customer's existing manual spray room, and it is not necessary to build a new spray room, which saves time and cost for customers. The body can integrate proportional valves, color change valves, gear pumps and other paint control systems. The paint process control components are closer to the spray gun and react faster, which can achieve precise paint control and save more than 10% of paint costs.

The GR6150-1500 robot is equipped with a self-developed dual-station turntable, which can quickly set up an independent spraying workstation and efficiently complete the cyclic production of various small batch parts, bringing customers a small investment and a large return. The flexible hollow wrist allows the paint pipeline to be built in, without the fear of winding pipes, and the spraying path is more reasonable. It can easily realize the spraying of the inner space of the workpiece, with higher production efficiency. It can be widely used in the automated spraying of small and medium-sized products such as car tail wings, car wheels, brake discs, mobile phone Pad panels, water pumps, motors, etc.