MAX2209A Wideband (800MHz to 2GHz) RF Power Detector-EEWORLD

Collect

The MAX2209A is a broadband (800MHz to 2GHz) RF power detector. It takes an RF signal from a directional coupler at the input and outputs a DC voltage proportional to the RF peak voltage. The output voltage varies with temperature, minimizing the effective detection error to less than ±0.5dB

The MAX2209A is available in a space-saving 2 × 2, 0.5mm pitch UCSP™ package.

Key Features

-25dBm to -5dBm power detection range

± 0.5dB detection error due to temperature

+2.7 V to +5 V single supply operation

Space-saving 4-bump UCSP package is 1mm²

Shutdown control

140ns step response time

MAX2209A Broadband (800MHz to 2GHz) RF Power Detector www.elecfans.com

Keywords：MAX2209A RF Power Reference address：MAX2209A Wideband (800MHz to 2GHz) RF Power Detector

Previous article：MAX16047A/MAX16049A EEPROM-Configurable
Next article：MAX2666/MAX2668 Low-Noise Amplifiers (LNAs)

Recommended ReadingLatest update time:2024-11-16 16:32

Basics of RF Measurement Technology for Non-Professionals

　　introduction 　　Currently, wireless communication products based on radio frequency principles are everywhere, and their number is growing at an alarming rate. From cellular phones and wireless PDAs to WiFi-enabled laptops, Bluetooth headsets, radio frequency identification tags, wireless medical devices and ZigB

[Test Measurement]

Basics of RF Measurement Technology for Non-Professionals

Mobile phone RF test summary (IV) - CMMB part (supplement)

To supplement the CMMB issue, the previous article said that MF_ID_0 is used to transmit control information as a control frame, while other frames are business frames. Depending on the configuration of different modulation methods and coding methods, business frames can be composed of 2-9 multiplexed frames to transmi

[Test Measurement]

Key RF Measurements in Digital TV Systems

In order to provide reliable, high-quality services consistently across all types of digital television (DTV) transmission systems, it is important to pay attention to the various factors that may affect the integrity of the system. This application note introduces these key RF measurement parameters, which can help us

[Test Measurement]

Key RF Measurements in Digital TV Systems

RF WCDMA Benchmark Testing White Paper

Overview By comparing with traditional instruments, we can understand the speed advantage of software-defined PXI RF instruments. As shown in the WCDMA measurement results, the LabVIEW measurement algorithm based on multi-core processor parallel execution can achieve significant speed improvement compared w

[Test Measurement]

Research on performance test of RFID tags

In actual applications, the application of RFID systems must comprehensively consider many factors that affect system performance, such as location, distance, temperature, humidity, interference, etc. Untested RFID systems have unclear overall system performance, which may affect the actual application effect and ev

[Embedded]

Research on performance test of RFID tags

Become an RF power measurement expert in three minutes

Since the birth of the first radio transmitter, engineers have been concerned about RF power measurement, and it is still a hot topic today. Whether in the laboratory, on the production line or in teaching, power measurement is essential. In the early days of radio development, most of the signals that test engineers

[Test Measurement]

Become an RF power measurement expert in three minutes

Spectral signal analysis limits RF power and parasitic noise emissions

　　Frequency domain measurement of RF power is the most basic measurement performed using spectrum and vector signal analyzers. Such systems must comply with the limits of power transmission and parasitic noise radiation in the relevant standards, and must also be equipped with appropriate measurement techniques to avo

[Test Measurement]

Research on SPI communication between ARM and RF chip TRF796x

Introduction SPI (Synchronous Serial Peripheral Interface) was first proposed by Motorola and appeared in its M68 series microcontrollers. It is a full-duplex synchronous serial interface that adopts a master-slave mode architecture and supports multiple slave mode applications, but generally only supports a single M

[Microcontroller]

Research on SPI communication between ARM and RF chip TRF796x

Popular Resources
Popular amplifiers