STM32F103VCT6+W5500 UDP communication is successful

Publisher:创新之梦Latest update time:2018-04-28 Source: eefocusKeywords:STM32F103VCT6 Reading articles on mobile phones Scan QR code
Read articles on your mobile phone anytime, anywhere

STM32F103VCT6+W5500 UDP communication is successful, and the dual-machine UDP communication between the computer and the W5500 module is realized.
It should be noted here that after the UDP sets the target port, it must be connected with this set target port. Otherwise, the communication will not be possible.

If UDP sets IP: 192.168.1.128 8000 port, the target IP 192.168.1.105 (here is the IP of my computer) port is: 8000,
then when the network assistant connects, the protocol type is: UDP, the local IP is: 192.168.1.105, the local port is: 8000, and then open it.

If it is opened successfully, you also need to set: target host IP: here is the W5500 module, 192.168.1.128 8000 port.

The default may be local, so communication is possible, but it is not relevant to the experiment.


The communication effect is as follows:



Keywords:STM32F103VCT6 Reference address:STM32F103VCT6+W5500 UDP communication is successful

Previous article:Analysis of TCP/IP protocol stack code TCP (STM32 platform)
Next article:Uip transplantation in STM32 platform to establish UDP link

Latest Microcontroller Articles
Change More Related Popular Components

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号