TLV5616 51 MCU driver-EEWORLD

Collect

=========================================Page 1==========================================
#include //
General header file definition

#include
#define uchar unsigned char
#define uint unsigned int
//*
Function declaration

void tlv5616_da(uint da); //DA
conversion function // Signal line sbit of

tlc5615 tlv5616_clk=P0^2; // Clock line sbit of TLC5615 tlv5616_data=P0^1; // Input data line sbit of TLC5615 tlv5616_cs=P0^3; //TLC5615 chip select line sbit tlv5616_fs=P0^4; //tlc5615 driver //da: DA value to be output void tlv5616_da(uint da) { uchar i; //da<<=4; tlv5616_cs=0; tlv5616_clk=1; tlv5616_fs=0; for(i=0;i<16;i++){ _nop_();_nop_(); tlv5616_data=(bit)(da&0x8000); tlv5616_clk=0; _nop_();_nop_(); da<<=1; tlv5616_clk=1; _nop_();_nop_(); } tlv5616_cs=1; tlv5616_fs=1; tlv5616_clk=0; for(i=0;i<16;i++); } void main(void) { uint a; //for(a=0;a<200;a++) // { tlv5616_da(4000); _nop_(); ==================================== Page 2====== ================================== // } } 

Keywords：TLV5616 driver Reference address：TLV5616 51 MCU driver

Previous article：A small example of 51 MCU driving 1602 LCD display
Next article：51 single chip microcomputer controls four-phase stepper motor

Recommended ReadingLatest update time:2024-11-16 08:30

51 single chip microcomputer dynamic digital tube

Mainly distinguish between position selection and segment selection Segment selection data unsigned char code DIG_CODE = { 0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07, 0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71}; //Display code of 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, b, C, d, E, F B

[Microcontroller]

51 single chip microcomputer dynamic digital tube

Three reasons to invest in metadata-driven data weaving design in China

Data weaving is an emerging data management design that maintains high market appeal in China. The 2022 Gartner Data and Analytics Cloud Adoption Survey shows that although respondents have different definitions of the term "data weaving", 42% of Chinese users said they have adopted this technology, and another 34% pl

[Industrial Control]

Three reasons to invest in metadata-driven data weaving design in China

Introduction to the principle and structure of 8051 series microcontrollers

A microcontroller is a control chip, a microcomputer, and with the addition of crystal oscillator, memory, address latch, logic gate, seven-segment decoder (display), buttons (similar to a keyboard), expansion chip, interface, etc., it is a microcontroller system, the following is a basic introduction to the principle

[Microcontroller]

Toshiba Launches SmartMCD™ Series of Gate Driver ICs with Embedded Microcontroller

First product in series enables sensorless control of 3-phase brushless DC motors Shanghai, China, March 28, 2024 – Toshiba Electronic Devices & Storage Corporation (“Toshiba”) today announced that it has started mass shipments of its SmartMCD™ Series of gate driver ICs with an embedded microcontr

[Embedded]

51 Microcontroller Learning: Stepper Motor Experiment

Experiment name: Stepper motor experiment wiring instructions: Experimental phenomenon: After downloading the program, when the KEY1 key is pressed, the motor rotation direction can be adjusted; when the KEY2 key is pressed, the motor accelerates; when the KEY3 key is pressed, the motor decelerates. Notes: Move the st

[Microcontroller]

《Linux driver: s3c2410_ts/s3c2440_ts module loading process》

Preface By analyzing the s3c2410_ts/s3c2440_ts module loading process, the bus-device-driver model and input subsystem framework in the Linux driver are analyzed. Main process analysis diagram s3c2440_ts main process analysis System Initialization MACHINE_START(SMDK24

[Microcontroller]

8051/2 microcontroller commonly used local communication methods UART, RS485, I2C, SPI 25AA040A read and write E2PROM 4

1. Description PART 3 SPI (SCLK, SDO, SDI) full duplex SCLK clock, SDO (MOSI) data output, SDI (MISO) data input 8051SPI and I2C also need to use IO simulation There are 4 types of SPI bus transmission: CPOL bit, high level: 1, low level: 0 CPHA bit, edge, read first then write: 0, write first then read: 1 When tr

[Microcontroller]

8051 MCU Tutorial Lesson 28: Design of MCU Music Program

Using a single-chip microcomputer (or single-board computer) to play music is probably one of the issues that radio enthusiasts are interested in. This article starts with the basic experiment of single-chip microcomputers, discusses the design principles of music programs, and gives specific examples for reference.

[Microcontroller]

8051 MCU Tutorial Lesson 28: Design of MCU Music Program

Popular Resources
Popular amplifiers