Mouser Electronics now stocks TI Ethernet PHY for building and factory automation

Mouser Electronics now sells

Texas Instruments DP83TD510E Ethernet PHY

May 20, 2021 – Mouser Electronics, an authorized global distributor of Texas Instruments (TI) solutions, is now stocking the TI DP83TD510E Ethernet physical layer (PHY) device. The PHY can achieve cable transmission distances of more than 2km and is a transceiver compliant with the IEEE 802.3cg 10BASE-T1L specification, eliminating the need for additional protocols, gateways, and cables for high-bandwidth communications, enabling designers to extend the reach of their industrial communications and automation applications without increasing cabling costs or system weight.

The TI DP83TD510E Ethernet PHY, available from Mouser, can transmit 10Mbps Ethernet signals up to 1.7km over a single twisted pair. The DP83TD510E's cable transmission distance is 1.5km longer than the 200m required by the IEEE 802.3cg 10BASE-T1L single-pair Ethernet specification. The device integrates cable diagnostic tools with built-in loopback and self-test functions to simplify the design and debugging process.

The PHY features an ultra-low noise coupled receiver architecture that enables long cable transmission distances and low power dissipation. This high-performance device features ultra-low power consumption, less than 38mW in 1V point-to-point mode. The DP83TD510E has external MDI termination to support intrinsic safety requirements and also supports RMII back-to-back mode for applications requiring cable transmission distances exceeding 2,000m.