Everyone knows that the five metals that pose the greatest threat to the natural environment are chromium, cadmium, copper, lead, and mercury, and batteries account for three of them, mercury, lead, and cadmium. If incinerated, it pollutes the atmosphere; if landfilled, it pollutes the soil and is harmful to crops; if it pollutes water sources, it is harmful to aquatic organisms (fish and shrimp, etc.). According to the information: a small button battery can pollute 600,000 liters of water, which is equivalent to the amount of water a person drinks in his lifetime; a No. 1 battery rots in the ground, which can make one square meter of land lose its use value and cause permanent pollution.
People cannot live without the earth, nor can they live without food. These toxic heavy metals enter the human body through various channels (breathing through the nose and mouth, eating vegetables, fish and shrimp, etc.), and long-term accumulation is difficult to eliminate. The medical community has confirmed that mercury can seriously harm the human nervous system, especially children; cadmium can cause osteoporosis, bone deformation, bone pain, etc., and cause liver and kidney damage; lead is the most difficult to excrete after entering the human body, and it interferes with kidney function and reproductive function. It can cause abnormal behavior and low IQ in children.
Since the harm caused by used batteries to humans has become an indisputable fact, how do other countries in the world deal with it? In some Western countries in Europe (such as Germany), used batteries have long been listed as hazardous and toxic wastes, and battery dealers must recycle them by "collecting old and selling new" and must not be discarded in nature at will. In China
, although a small number of environmentalists have learned from the experience of some Western countries and advocated the classified collection of used batteries, on the one hand, the government has no clear regulations on the treatment of used batteries, and on the other hand, people have a low level of understanding of the harm of used batteries and do not pay enough attention to it; they are not enthusiastic about the collection of used batteries and the number of participants is not high. This paper proposes a green, environmentally friendly and energy-saving power supply that replaces the traditional No. 5 battery, which is designed with solar panels, super capacitors and charge pumps (LM2788-2.0) as core components. It is applied to quartz clocks, avoiding the pollution of the environment by waste No. 5 batteries from the source, and will play a positive role in protecting the environment and guarding our green home.
1 Component Description
The circuit is composed of four core components: solar panels, super capacitors, charge pumps, and Schottky diodes.
(1) The solar panel material is polycrystalline silicon, with dimensions of 60mm in length, 44mm in width, and 3mm in thickness; output electrical parameters: operating voltage 5.5V, operating current 60mA, rated power 0.33W, see Figure 1.
(2) The supercapacitor parameters are 120F/2.3V. Its characteristics are fast charging, long life, high efficiency, large capacity, and good temperature adaptability. In addition, there is no pollution in each link of production, use, storage, and disassembly, as shown in Figure 2.
(3) Charge pump LM2788-2.0 is an 8-pin step-down charge pump DC/DC converter. Input 2.6V~5.5V, output 2.0V. The main features of this converter are: output voltage accuracy: 2.0V±5%, output current up to 120mA; maximum conversion efficiency up to 90%; low power consumption, working current 32μA; with shutdown control, power consumption is only 0.1μ in the shutdown state; overheating and short circuit protection, see Figure 3.
(4) The Schottky diode 1N5819 is characterized by large current (1A), low voltage drop (0.3V), and high withstand voltage (40V), as shown in Figure 4.
2 Circuit working principle
Hang the quartz clock in a brightly lit place indoors. See Figure 5 for the circuit schematic.
During the day, indoor light diffuses on the solar panel, generating current, which is converted by the charge pump LM2788-2.0 to output a voltage of 2.0V; after being isolated by the Schottky diode 1N5819, it supplies power to the quartz clock on the one hand and charges the supercapacitor on the other hand (the upper limit of the voltage across the capacitor is Uh=Uout-Ud1=2.0-0.3=1.7V). At night, the solar panel does not generate current, and the energy stored in the supercapacitor supplies power to the quartz clock. The function of the Schottky diode D1 is to prevent the energy stored in the supercapacitor from flowing back into the charge pump and solar panel when the solar panel is not generating electricity (at night or on cloudy days).
According to the national standard for quartz clocks: the operating voltage range of quartz clocks is generally 1.25~1.70V; the average power consumption current of the measured quartz clock jump second (intermittent) quartz clock is about 125μA. When the supercapacitor voltage drops from 1.7V to 1.25V, the amount of electricity that can be released is △Q=CUh-CUL=C(Uh-UL)=120×(1.7-1.215)=54C; if this amount of electricity is output at an average current of I=150μA, it will take time t=△Q/I=54/(150×10-6)=3.6×105s=100h to be consumed. Through calculation, the time is guaranteed to ensure the backup power for the quartz clock to work at night. The modified quartz clock is shown in Figure 6.
The specifications or models of components used in the circuit schematic are shown in Table 1.
3 Circuit highlights green theme
The quartz clock uses green energy design, firmly grasps the theme of green, environmental protection, and energy saving, and effectively solves the harm of ordinary batteries to human body, soil, water source, etc. Its characteristics are as follows:
(1) Energy acquisition is green
As we all know: sunlight can be said to be inexhaustible. Directly converting sunlight into electrical energy to replace batteries as the energy source of quartz clocks is conducive to slowing down the speed of global warming and environmental degradation, reflecting that low-carbon life starts from small things around us, and verbal advocacy is not as good as half a step of practice.
(2) Energy storage is environmentally friendly
Alkaline batteries have the shortest service life, and rechargeable batteries (lithium ion, nickel metal hydride) have a shorter service life (repeated cycles of hundreds of times). Supercapacitors have the advantages of large capacity, long service life (repeated cycles of nearly one million times), maintenance-free, economical and environmentally friendly.
(3) Energy use is efficient
The energy storage of rechargeable batteries (lithium ion, nickel metal hydride) is through the process of electrical energy → chemical energy → electrical energy, and the conversion efficiency is low. The supercapacitor used in this circuit is a new type of energy storage device. It does not undergo chemical energy conversion, so it is of course highly efficient and energy-saving. In addition, the traditional step-down method of obtaining the required working voltage by dividing the DC power supply voltage also has low conversion efficiency. This circuit uses the charge pump LM2788-2.0 to manage the power supply, which improves the utilization rate of electric energy and also reflects energy saving.
4 Promotion value
According to the sixth national census in 2010, there are more than 400 million households in 31 provinces, autonomous regions, and municipalities across the country, and most of them use quartz clocks for timekeeping. Conservative estimates show that there are at least 400 million quartz clocks in households across the country, consuming 800 million ordinary batteries each year. If quartz clocks in 100 million urban households use green energy, then the protection of the environment is obvious. Because this circuit is low-cost, it has certain promotion and use value.
Previous article:Design of an improved photovoltaic charging system to maximize the power of energy storage equipment
Next article:The underlying software application of network cameras based on TMS320DM365
- MathWorks and NXP Collaborate to Launch Model-Based Design Toolbox for Battery Management Systems
- STMicroelectronics' advanced galvanically isolated gate driver STGAP3S provides flexible protection for IGBTs and SiC MOSFETs
- New diaphragm-free solid-state lithium battery technology is launched: the distance between the positive and negative electrodes is less than 0.000001 meters
- [“Source” Observe the Autumn Series] Application and testing of the next generation of semiconductor gallium oxide device photodetectors
- 采用自主设计封装,绝缘电阻显著提高!ROHM开发出更高电压xEV系统的SiC肖特基势垒二极管
- Will GaN replace SiC? PI's disruptive 1700V InnoMux2 is here to demonstrate
- From Isolation to the Third and a Half Generation: Understanding Naxinwei's Gate Driver IC in One Article
- The appeal of 48 V technology: importance, benefits and key factors in system-level applications
- Important breakthrough in recycling of used lithium-ion batteries
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- Understand the performance test of 18650 lithium battery - cycle test
- Sinlinx A64 Linux writes LED driver through device tree (with reference code, not tested)
- EEWORLD University Hall--Analysis of rules and techniques for high-speed PCB design
- LMV321 power supply range problem
- [SAMR21 New Gameplay] 29. WS2812 Application - Rainbow
- Several filtering methods for single chip microcomputer to resist interference by software
- What do you think of Huawei HiSilicon's operation?
- Problems encountered when LCD1602 scroll screen display
- Summary of the differences between SPMSM and IPMSM
- How did I get 296g of energy from Alipay Ant Forest?