Download>Category>Others>undefined>BTA_A-C-E-G Analog Processor Card application manual

pdf

BTA_A-C-E-G Analog Processor Card application manual

2017-05-09
55.95KB
Points it Requires : 2

Download

repReport

Document Introduction
You Might Like
Recommended Downloads

Balluff positioning systems are used

in many areas including hydraulic

cylinders, presses, punch presses,

extruders, rolling mills, injection

molding, blowmolding, woodworking and packaging machinery,

textile machinery, as well as

elevators, liquid level monitoring

systems, and handling equipment.

The processor card is configured as

a Eurocard with front panel, suitable

for installation in a 19-inch rack or

card holder.

Front Panel (Fig. 1)

Located on the front panel are:

— Grip with model number

— Captive mounting screws

— LED-displays

Power (green):

Supply in

Error (red):

Position data invalid due to:

- cable break

- transducer not connected or

defective

- Magnet not present or outside

of active stroke range of the

transducer.

— Zero Potentiometer

Nullpoint adjustment by 15 %

— Gain Potentiometer

End value adjustment

(range adjustment)

Eurocard (Fig. 1)

The Eurocard contains the following

connection elements:

— 32-pin edge connector per

DIN 41612 F at the rear of the

Eurocard for connecting

- transducer,

- power supply,

- host controller

(analog output data).

unfold

Recommended ContentMore

Open source project More

Popular Components

Searched by Users

Just Take a LookMore

Synopsys IP Resources: A look at the complete Ethernet PHY IP for high-performance computing SoCs
As system demands increase, hyperscale data centers need to scale. For server-to-server communications required by hyperscale data centers, Ethernet has become the preferred network protocol because i
What is Common Mode Rejection Ratio (CMRR)
CMRR (Common Mode Rejection Ratio) Common Mode Rejection Ratio.　　In electronics , the common mode rejection ratio (CMRR) of a differential amplifier (or other device) is a metric that quantifies the d
High Definition Smith Chart Black and White_the_Smith_Chart.
Is there any difference between these two circuits?
Is it just the difference between a transistor and an operational amplifier? Are they essentially the same?
Help~How can I make the PCB package of this component according to the picture?
How can I draw the PCB package of this original part (HDR-E26FSG1+) according to the picture? I only found these materials on the Internet. I can draw the appearance dimensions, but I don’t understand
Using R329 for offline face detection
Please explain the cause of the error
[TI star product limited time purchase] + teach you how to quickly get started with AWR6843
[NXP Rapid IoT Review] Hello Buttons
micropython update: 2020.2

Trending Downloads

BTA_A-C-E-G Analog Processor Card application manual

Document Introduction