ON Semiconductor's high-efficiency LED lighting solutions in line with the trend of solid-state lighting

As energy prices continue to rise and environmental problems increase, countries around the world are committed to reducing greenhouse gas emissions and accelerating the pace of replacing environmentally harmful compact fluorescent lamps (CFL) and linear fluorescent lamps (LFL) with LEDs. So far, many countries and regions in the world have announced timetables and roadmaps for the "retirement" of incandescent lamps. China's plan to ban (ban) incandescent lamps has also been released recently. The National Development and Reform Commission and other departments jointly issued the "Notice on the Gradual Prohibition of the Import and Sale of Ordinary Incandescent Lamps", deciding to gradually ban the import and sale of ordinary incandescent lamps in stages according to power size from October 1, 2012.

LED has become the key driving force of the lighting revolution with its longer life, excellent color combination, energy saving and compliance with environmental protection requirements. In recent years, LED has become one of the fastest growing semiconductor markets, with a five-year compound annual growth rate of 19.3%. It is expected that the total market value in 2013 will reach US$12.4 billion, as shown in Figure 1.


Figure 1: LED market growth momentum and trends

The light output, energy efficiency and cost of high-brightness LEDs are rapidly improving, which has led to a continuous expansion of their application scope. According to the working voltage of LED, it can be divided into three power levels: 0.9V to 7V (mobile phones and mobile devices), 7V to 60V (automobiles and LCD backlights), and 60V to 700V (general lighting). Among these, the markets with the greatest growth potential are automobiles, LCD backlights, and general lighting. Automotive applications mainly include neon lamp replacement, emergency vehicle lights, combination taillights, instrument panel lighting, infotainment, interior lighting, central high-mounted brake lights, headlights, parking lights, etc.; LCD backlights mainly include large-screen LCD TVs, medium-screen notebooks, GPS, photo frames, netbooks, etc.; general lighting mainly includes offline LED drivers/ballasts, street/area lighting, replacement bulbs, replacement fluorescent lamps, traffic lights, work lighting, landscape lighting, building lighting, etc. It is not difficult to see that LED lighting will gradually enter more application areas in the future.

ON Semiconductor's high-efficiency LED lighting solutions

Using advanced technology to perform the same or even more tasks with less electricity and further improve energy efficiency has always been ON Semiconductor's unremitting pursuit. ON Semiconductor has developed a wide range of products and solutions for high-efficiency LED applications, which can meet the various challenges of LED lighting applications, such as improving power density, achieving power factor correction, improving overall reliability, wider input power range, meeting space constraints and specific lighting requirements (such as triac dimming), etc. ON Semiconductor's

wide product range covers AC-DC power supply ICs, DC-DC drivers, CCR current regulators, CCCV control, HV-FETs, rectifiers, digital interfaces, ambient light sensors, protection, power line carrier (PLC) modems, etc.

ON Semiconductor continues to innovate and launch LED general lighting application solutions, fully reflecting the characteristics of high energy efficiency, innovation and robustness.

· Low and medium power LED lighting applications

In low and medium power LED lighting applications, MR16 bulbs are very typical. The design challenge is to provide a relatively flat output current under different AC voltage conditions and provide excellent energy efficiency under different DC conditions. ON Semiconductor's buck-boost NCP3065 switching regulator uses a bridge rectifier for AC-DC conversion, with wide input and output operating voltages and stable output current. The NCP3065 can be configured as a buck-boost to meet the requirements of overlapping input and output voltages, and has open and short circuit LED protection functions, which can be dimmed by a 12 Vac electronic transformer/wall dimmer. The internal reference voltage of the NCP3065 is fine-tuned to 2%, thus providing extremely accurate and stable current even in a wide range of input voltage, LED forward voltage and inductor tolerance.

Figure 2: MR16 LED bulb circuit and reference design using NCP3065

Another MR16 LED solution is the NCL30100 for buck applications. It is an LED driver controller with an efficiency of more than 95%, a switching frequency of up to 700kHz, no output capacitor required, and a Vcc operating range of 6.35 to 18 V. It can drive one or more high-power LEDs and is mainly used in applications such as MR16 LED lighting, ambient lighting, solar LEDs, traffic lighting, outdoor lighting, and LED light strips. Its PCB is very small and can be installed in the lamp holder of an MR16 lamp. The hysteresis control feature of the NCL30160 provides fast response during load transients, eliminating the need for small signal control loop compensation components. Protection features include resistor-settable LED current, LED short-circuit protection, undervoltage lockout, and thermal shutdown.



Figure 3: MR16 LED bulb circuit and reference design using NCL30100

ON Semiconductor's other LED drivers include the NCL30000, an offline driver with PFC and TRIAC dimming compatibility, which can achieve more than 80% efficiency (typically 83%) at low levels of 5 to 15 W output power, suitable for LED drivers/ballasts, recessed lights/spotlights/outdoor lighting; AC-DC isolated power supply solutions for LED lighting, suitable for 3 to 8 W low-power lighting, 8 to 40 W recessed lights and PAR bulbs, 40 to 125 W building and area lighting, and 50 to 300 W high-efficiency LED street lighting.

· High-power lighting applications

NCL30160 is a new NFET hysteretic buck, constant current driver launched by ON Semiconductor for driving high-power LEDs. It is a new generation of high-efficiency solutions with a current increase of 1.5 amps, very low losses, and a smaller size to minimize space and cost. It can provide an energy efficiency of up to 98% by utilizing a low on-resistance internal MOSFET of only 55mΩ and the ability to operate at 100% duty cycle. The high switching frequency of up to 1.4MHz allows designers to use smaller external components, minimize board size and minimize cost.



Figure 4: High-brightness LED driver NCL30160 application circuit

Another dedicated LED power supply IC is the NCL30051, which can provide a constant voltage for a step-down DC-DC (DC-DC) converter/LED driver. The device integrates a critical conduction mode (CrM) PFC controller and a half-bridge resonant controller, and has a built-in 600V driver. It is optimized for offline power supply applications and has all the features required to achieve high-efficiency, small form factor designs.

The LED lighting chipset composed of the NCL30051 and NCL30160 can simplify the power circuit design with the minimum required external components. This architecture enables the chipset to be integrated into a more compact and cost-effective LED lighting power supply. In addition to being used in general lighting outdoor lighting applications (such as street lights and parking lot lights), it can also be widely used in industrial and automotive lighting applications.

· Other lighting applications and reference designs

ON Semiconductor also provides a variety of reference design power supplies for various lighting applications. In addition to the MR16 LED bulb reference design demonstration board mentioned above, there is also a new low-cost line-dimmable LED T5 tube reference design that can achieve direct AC drive of CCR LEDs with only 5 components; a desk lamp redesigned with LED modules, with a higher light output than halogen lamps and only 1/4 of the energy consumption; and an offline LED driver with PFC using NCL30000 that is compatible with TRIAC dimming and is widely used in recessed lights/spotlights/outdoor lighting.

ON Semiconductor will also launch a high-power (100 to 250 W) LED driver reference design based on the NCL30051 for LED street and architectural lighting applications. The design features output open and short circuit, over-temperature, over-current (auto-recovery) and over-voltage input (OVP high voltage) protection. It can also perform two-stage dual-level analog dimming or PWM dimming (frequency 100 to 300Hz). Its dimming range is greater than 10:1; the analog voltage input is 1-10 V. Samples of this high-power lighting application solution will be available in the first quarter of 2012.


Figure 5: 100 to 250 W high-power LED driver reference design based on the NCL30051

Leading high-efficiency solutions meet various applications

ON Semiconductor uses its core expertise and advantages in power management, high-efficiency power supplies and packaging to develop dedicated LED drivers for different application fields and launch solid-state lighting solutions that meet or exceed regulatory requirements around the world. These solutions use unique LED driver power architectures, analog and dimming technologies, flyback converters and non-isolated DC-DC topologies, as well as patent-pending self-biased transistor technology. They have a wide range of applications, from portable battery-powered products to automotive interior lighting, to general lighting and architectural solid-state lighting. They can be used regardless of whether the product is powered directly by AC or DC lines, providing abundant options for realizing the lighting revolution.