Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be
needed. Please inquire of us about conditions.
※1 素子毎の負荷電力の合計が、パッケージ定格電力を超えない条件で御½用ください。
※1 Total power consumption of all elements should not exceed the package power rating.
The resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive film, abnormality
in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the components, but attention should be paid
to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V or over at 100pF, 1.5kΩ) to cause a change in resistance in the conditions
of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply the excessive static electricity at the time of mounting on the boards. When
designing, consideration can be taken into withstanding ESD for customized KPC products. Please consult with us about the details.
●
Hand soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
●
Avoid storing components under direct sun rays, high temperature/humidity. Direct sun rays will cause quality change of taping and difficulty of keeping appropriate peeling
strength. In the case of 5〜35℃/35〜75%RH, there is no deterioration of solderability for 12 months, but take special care for storing, because condensation, dust, and toxic gas
like hydrogen sulfide, sulfurous acid gas, hydrogen chloride, etc. may drop solderability.
[size=4][color=#000000] In view of the complexity of current applications, SOC chips can better meet the needs of applications and media, integrate many interfaces, use ARM as an application processor...
[i=s] This post was last edited by a student of media on 2018-10-13 22:37 [/i] 1. I have a 0v5640 and need to process grayscale images. It is troublesome to convert RGB. I can use YUV and directly tre...
content1. Why process signals digitally?
(1) Analog circuits are composed of analog components: resistors, capacitors, and inductors. These components will dynamically affect the effects of analog cir...
One feature that is used in almost all embedded applications is the ADC module (Analog to Digital Converter). These ADCs can read the voltage from analog sensors like temperature sensors, tilt sensors...
SAR ADC Internal StructureThe ADC built into the STM32 microcontroller uses the SAR (Successive Approximation) principle to perform the conversion in multiple steps. The number of conversion steps is ...
4. Verify each function in initialization.
Next, let's see if the initialization function written above is available. We have written three functions above, namely
DM9000_init(), send...[Details]
Measuring power supply ripple accurately is an art in itself. In the example shown in Figure 1, a junior engineer used an oscilloscope all wrong. His first mistake was using an oscilloscope probe wit...[Details]
The electric motor of an electric vehicle is an active load with a wide speed range. It needs to accelerate and decelerate frequently during driving. The working conditions are more complicated tha...[Details]
On April 22, the People's Government of Shandong Province issued the "Top Ten Innovations", "Top Ten Industries" and "Top Ten Demand Expansions" Action Plan (2024-2025).
"Top Ten Industries"...[Details]
Tire pressure monitoring, as a technology to ensure vehicle safety, has become a "standard feature" for many models, but there are still some models that do not support it. According to the latest re...[Details]
Business Challenges
The digital construction of a hospital is a large and complex system project. The overall system is composed of hundreds of business subsystems, and there is frequent d...[Details]
;Use the serial port debugging wizard or the PC terminal's hyperterminal, set the baud rate to 9600, 8 data bits,
1 stop bit, no parity bit.
;First, send a character such as "2" from the PC...[Details]
introduction
Sound card technology is one of the key technologies of multimedia computer technology.
Its emergence makes computers more expressive. At present, due to the simple struct...[Details]
This paper introduces a temperature control circuit with simple artificial intelligence. When using this circuit for temperature control, you only need to turn the switch to position 2, set the con...[Details]
VOsySmonitor is an ISO 26262 ASIL C certified partitioner for safety-critical systems based on ARM TrustZone, which enables multiple operating systems with different criticality levels to execute c...[Details]
Five key factors to simplify LED driver design Chip heating This is mainly for high-voltage driver chips with built-in power modulators. If the current consumed by the chip is 2mA, and a volt...[Details]
Pickering introduces new PXI/PXIe multiplexer switch modules to support MIL-STD-1553 testing
The 40/42-739 series provides 450MHz differential bandwidth and single or dual differenti...[Details]
As autonomous driving technology becomes more mature, people are becoming more familiar with it, and ADAS technology plays a particularly important role in autonomous driving. The ADAS market has g...[Details]
STM32 ADC introduction: STM32 has 1~3 ADCs (STM32F101/102 series has only 1 ADC), which can be used independently or in dual mode (increasing the sampling rate). The ADC of STM32 is a 12-bit s...[Details]
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
