MEWTF-3A12-B/CE

　　 The relay characteristics of the relay are shown in Figure 2 　　Among them, the horizontal axis Ia is the pull-in current; Ir is the release current; Iw is the working current; Ik is the hold...[Details]

Why are there two startup methods? This is determined by the different characteristics of the two types of FLASH. NAND FLASH has a large capacity and the cost of storing unit bit data is much lowe...[Details]

Many electrical equipment also need to be tested for insulation resistance regularly during use. Various electrical equipment in various companies, especially high-voltage equipment, will be damp or ...[Details]

The MAX19001 is a fully integrated, four-channel, high-performance pin electronic driver with built-in level adjuster, ideal for memory and SOC ATE systems. Each channel of the MAX19001 includ...[Details]

The industry expects that in the next five years, the mobile device display market will continue to trend towards higher resolution, brighter and lower power consumption. These display attributes wil...[Details]

Fault phenomenon Self-test error: 640 650 561 Testing process After testing, it was found that the instrument channel component was damaged, causing the error. Repair process After replacing dama...[Details]

Washing machines are essential household appliances for every family. In the 1980s, they were called the "three major appliances" along with televisions and refrigerators. With the development of t...[Details]

1. Introduction In a bustling city, when night falls, colorful lights light up, lighting up this dark world and adding a little interest to people's lives, and running lights are one of the roles. Wi...[Details]

Shanghai HiSilicon announced that the Rongbang intelligent AI voice module solution based on HiSilicon SoCWi-Fi IoT chip has officially entered mass production and is installed in Gree Electric's AI ...[Details]

The extrusion requirements of new energy vehicle battery packs refer to the compression conditions that need to be met during the manufacturing and use of new energy vehicle battery packs. With the...[Details]

1 Introduction The detection of battery status parameters in the battery production process is the key to ensure the quality of the battery. However, at present, the domestic battery statu...[Details]

In order to improve the reliability and security of microcomputer systems in embedded systems, a common method is to use a "watchdog". Watchdogs are divided into hardware watchdogs and software watch...[Details]

Chapter List Part 1: Introduction to ARM assembly language  Part 2: Analysis of the process of generating ARM assembly programs from C/C++ programs Part  3: ARM assembly language program structure ...[Details]

Abstract: A system design scheme based on AVR ATmega128 microcontroller and Altera's Cyclone series EP1C3T100 is proposed. The measurement principle and measurement error of the digital low-frequen...[Details]

Chen Xiao, our reporter As of October 31, according to the data from iFinD of Tonghuashun, according to the industry classification of Shenyin Wanguo, 102 lithium battery industry chain companies in t...[Details]