The data reading and writing on the Local Bus are divided into synchronous mode and asynchronous mode. In the synchronous mode, an external clock signal is required for the receiving end and the sendi...
Live Topic: Explore the High-Tech of Network Cameras with Infineon
Live broadcast time: December 28, 2021 (Tuesday) 10:00-11:30 am
brief introduction:
Security monitoring based on video processing has...
1. IntroductionWith the rapid development of the national economy and the substantial improvement of people's living standards, people's demand for automobiles is increasing, and the market competitio...
[i=s]This post was last edited by Baboerben on 2020-1-10 23:14[/i]TI MSP430 series microcontroller, the baud rate value of the usart module is determined by the following three registers: UxBR0, UxBR1...
Altech Battery has signed a letter of intent (LOI) to supply 30 1MWh Cerenergy GridPack sodium batteries per year to a major German industrial park for energy storage as part of a f...[Details]
Since the servo system serves many purposes, such as computer CD drive control, radar tracking system, feed tracking system, etc., the requirements for the servo system are also different. The tech...[Details]
On August 2, Cerence Inc., AI for a world in motion, announced that it has partnered with the new luxury smart electric car brand smart to provide AI-driven solutions for the next generation of sma...[Details]
A few days ago, Qichacha patent abstract showed that Huawei Technologies Co., Ltd. disclosed a patent for "an automatic parking interaction method and device". The automatic parking interaction metho...[Details]
During CES 2020, Velodyne, the originator of LiDAR , released a LiDAR called Velabit , and announced that the mass production price is only $100. In the past ten years, the price of automotive LiDAR ...[Details]
0 Introduction
The development of embedded systems has its own special applications and specific functions, and the embedded Linux operating system is favored by the industry because...[Details]
Current detection or feedback is usually required in power supplies and other equipment. Current detection usually uses a series sampling resistor and an amplifier to amplify the voltage on the resi...[Details]
Apple has made a lot of moves. They suddenly launched the 2019 education discount, quietly updated the MacBook Air and MacBook Pro, and also lowered the price of upgrading hard drives in the Mac seri...[Details]
What are flow batteries, lithium batteries, and sodium batteries? Why do they attract so much attention? What are their advantages over traditional energy storage? Where will they go in the future?...[Details]
When the multimeter is set to the diode position (buzzer position) to measure the transistor... First, we need to determine which leg is the B pole. So use the red test pen to touch any one of the ...[Details]
0 Introduction
ARM ADS stands for ARM Developer suite. It is an integrated development tool for ARM series processors launched by ARM. It is widely used. The highest version is 1.2, which repl...[Details]
A common problem encountered in electronic design is the testing of the transmission characteristics of the circuit under test (DUT). The transmission characteristics here include gain and attenuatio...[Details]
Primary optical design of LED light source
Each LED light source has a specific light intensity distribution characteristic, that is, the light distribution curve. We call this process primary op...[Details]
As one of the seven key industries of the digital economy, the Internet of Things has experienced rapid growth in recent years. The "14th Five-Year Plan" Digital Economy Development Plan proposes to ...[Details]
Samsung Electronics released a report revealing that its sales of ultra-large TVs have seen significant growth. In the first three quarters of this year, sales of TVs 80 inches and above climbed 15...[Details]