-
New advances in silicon manufacturing: FD-SOI
In recent years, in order to ensure that the silicon manufacturing technology node is further reduced and break through the limits of traditional tec...[Details]
-
By using the multiplexing function input capture function of the PA8 pin of stm32f407, the waveform corresponding to each button of the remote control is recorded, and then transmitted through the in...[Details]
-
Designing a power system for a Field Programmable Gate Array (FPGA) is no easy task. FPGAs are highly configurable semiconductor devices that are used in a wide range of applications and end market...[Details]
-
ECOM Instruments exhibits explosion protection solutions for smart production at SPS 2021
Hazardous areas in many manufacturing processes remain blank on the map of Industry 4.0. The...[Details]
-
In recent years, with the continuous advancement of the United Nations' 2030 Sustainable Development Goals (hereinafter referred to as "SDGs"), SDGs have gradually become the main theme for enterpris...[Details]
-
There has been a lot of good news about Tesla recently. First, Tesla's stock price broke through $420, and recently Tesla's autonomous driving technology has taken another step forward. According t...[Details]
-
After the new energy vehicles were promoted by the country for several years, the public has a better understanding of charging piles, which are mainly divided into two categories: fast charging an...[Details]
-
Acousto-optic modulation is an external modulation technology. The acousto-optic device that controls the intensity change of the laser beam is usually called an acousto-optic modulator. Acousto-op...[Details]
-
Prime Minister, let me introduce the timer counter of 51 single chip microcomputer. 51 has two timer counters, namely T0 and T1, which are basically the same.
; There is a little differen...[Details]
-
You need to install two software, MPLAB X IDE v5.50 and xc8-v2.32-full-install-windows-x64-installer For simulation, you can also install proteus software 1 Installation of MPLAB X IDE v5.50 Softwa...[Details]
-
The impedance matching of the probe refers to the impedance matching between the probe and the oscilloscope circuit, which is mainly the capacitance effect. When the impedance does not match, the sig...[Details]
-
1 Introduction When the MCS-51 single-chip microcomputer system is expanded, the P0 port is generally used as the lower 8 bits of the address (time-sharing with the data port), and the P2 port is us...[Details]
-
O Introduction At present, the market and embedded system products for scientific research in colleges and universities, such as Vxworks, Linux and Windows CE, are quite mature and provide powerf...[Details]
-
Why use active probes? Passive probes are well suited for measurement applications with bandwidths below 50 MHz. This is because the input capacitance of passive probes is in the 9 or 10 picofarad (p...[Details]
-
A team from the Massachusetts Institute of Technology has made an important breakthrough in the field of electronic manufacturing: they used full 3D printing technology to produce active electronic...[Details]
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD