Teaching with No Workpiece Required -- Quick and Easy Setting
There is no need for delicate sensitivity adjustments.
Simply adjust the optical axes of the Sensor and Reflector, then press
the Teaching
button
twice.
This high-reliability design eliminates
worries
about variations in the
sensitivity settings of different operators.
Industry Top
IP69K Degree of Protection with an SUS316L Housing
The housing is constructed of corrosion-resistant SUS316L,
and the display cover is PES (polyethersulfone) or PEI (polyetherimid).
Both materials are highly resistant to the effects of detergents and
disinfectants.
IP69K degree of protection also allows the E3ZM-B to
withstand
washing with
high-temperature, high-pressure
water.
This makes the E3ZM-B
well
suited to
use
in sites requiring a high
level of hygiene.
A Wide Ambient Temperature Range of
−40
to 60°C
This
wide
temperature range meets the needs of the many and diverse
applications in the
beverage
industry.
Applications
Detecting Plastic Bottles
The E3ZM-B@1/-B@6 are not applicable for detecting transparent objects that exhibit no birefringence, such as
glass bottles.
Transparent objects made of resin also exhibit little birefringence, and cannot be detected with complete stability.
Check the detection stability of objects such as these prior to actual operation.
Precautions for
Correct Use
2
E3ZM-B
Ordering Information
Sensors
[Refer to
Dimensions
on page 12.]
Sensing method
Appear-
ance
Sensitivity Connection
adjustment
method
Pre-wired
(2 m)
Connector
(M8, 4 pins)
Pre-wired
(2 m)
Connector
(M8, 4 pins)
Pre-wired
(2 m)
Connector
(M8, 4 pins)
Pre-wired
(2 m)
Connector
(M8, 4 pins)
Red light
Model
Sensing distance
Special
reflector
Order
separately
NPN output
E3ZM-B61 2M
E3ZM-B66
PNP output
E3ZM-B81 2M
E3ZM-B86
Teaching
type
E3ZM-B61-C 2M E3ZM-B81-C 2M
Included
E3ZM-B66-C
E3ZM-B86-C
E3ZM-B81T 2M
E3ZM-B86T
Retroreflective
with MSR function
One-turn
adjuster
type
500 mm
[100 mm]
*
Order
separately
E3ZM-B61T 2M
E3ZM-B66T
E3ZM-B61T-C 2M E3ZM-B81T-C 2M
Included
E3ZM-B66T-C
E3ZM-B86T-C
*Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Accessories
Special Retroreflective Reflector
(A Retroreflector is provided depending on the model number. Check the model number in the remarks column.)
[Refer to
Dimensions
on page 12.]
Name
Model
Sensing distance
(rated)
E3ZM-B@1(T)/-B@6(T)
Quantity
Remarks
A Reflector is provided with the E3ZM-B@@(T)-C.
A Reflector is not provided with the Sensor.
A Reflector is not provided with the Sensor.
The MSR function is enabled.
A Reflector is not provided with the Sensor.
The MSR function is enabled.
E39-RP1
Special Polarizing
Reflector
500 mm
[100 mm]
*
1
E39-RSP1
[0 mm]
*
250 mm
1
E39-RP37
250 mm
[0 mm]
*
1
Note: Previous OMRON Retroreflective Reflectors (E39-R1/-R1S/-R2/-R3/-R9/-R10/-R1K/-RS1/-RS2/-RS3, etc.) cannot be used with the E3ZM-B.
*Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
3
E3ZM-B
Mounting Brackets
A Mounting Bracket is not provided with the Sensor. Order a Mounting Bracket separately if required.
[Refer to
Dimensions
on E39-L/E39-S/E39-R, E39-L@.]
Appearance
Model
Quantity
Remarks
Appearance
Model
Quantity
Remarks
E39-L153
(SUS304)
*1
1
Mounting Brackets
E39-L98
(SUS304)
*2
1
Metal Protective Cover
Bracket
E39-L104
(SUS304)
*1
1
E39-L150
(SUS304)
1 set
(Sensor adjuster)
Easily mounted to the
aluminum frame rails
of conveyors and
easily adjusted.
For vertical angle
adjustment
E39-L43
(SUS304)
*2
1
Horizontal Mounting
Bracket
E39-L151
(SUS304)
1 set
E39-L142
(SUS304)
*2
1
Horizontal Protective
Cover Bracket
E39-L44
(SUS304)
1
Rear Mounting
Bracket
E39-L144
(SUS304)
*2
1
Compact Protective
Cover Bracket
Note: When using Through-beam models, order one bracket for the Receiver and one for the Emitter.
*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired Connector models.
*2. Cannot be used for Standard Connector models.
Sensor I/O Connectors (Sockets on One Cable End)
(Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
[Refer to
Dimensions
on XS3.]
Size
Specifications
Straight
*1
Appearance
2m
5m
2m
5m
Cable
Model
XS3F-E421-402-A
M8 (4 pins)
Standard
L-shaped
*1 *2
4-wire
XS3F-E421-405-A
XS3F-E422-402-A
XS3F-E422-405-A
Note: The outer cover of the cable is made of PVC (polyvinyl chloride), the nut is make of SUS316L stainless steel, and the degree of protection is IP67 (IEC 60529).
When high-pressure washing will be used, select an I/O Connector that has IP69K degree of protection.
*1. The connector will not rotate after connecting.
*2. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.
4
E3ZM-B
Ratings and Specifications
Sensing method
Model
Item
NPN output
PNP output
Retroreflective with P-opaquing (*1) and MSR functions
E3ZM-B61(-C)/-B66(-C)
E3ZM-B81(-C)/-B86(-C)
100 to 500 mm (Using E39-RP1)
500-ml, transparent, round PET bottle (65-mm dia.)
Sensor: 3° to 10°
Reflector: 30°
10 to 30 VDC, including 10% ripple (p-p)
450 mW max. (current consumption for a 30-V
power supply voltage: 15 mA max.)
25 mA max.
E3ZM-B61T(-C)/-B66T(-C) (*2)
E3ZM-B81T(-C)/-B86T(-C) (*2)
Sensing distance
Standard sensing object
Directional angle
Light source (wavelength)
Red LED (650 nm)
Power supply voltage
Current consumption
Control output
Operation mode
Protection circuits
Response time
Sensitivity adjustment
Ambient illumination
Ambient temperature
range
Ambient humidity range
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
*5
Connection method
Indicators
Weight (packed state)
Housing
Lens
Materials
Indication
Buttons
Cable
Accessories
*6
Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 2 V max.)
Open-collector output (NPN/PNP output depending on model)
Light ON/Dark ON cable switch selectable
Light ON/Dark ON switch selectable
Reversed power supply polarity, Load short-circuit protection, Mutual interference prevention,
[i=s]This post was last edited by ienglgge on 2018-12-8 11:35[/i] When compiling the iar project, Fatal Error[Pe1696]: cannot open source file "stm8s.h" appears. The corresponding file has been added....
Due to time constraints, although it has not been completed yet and has not been done very well, I will write a summary here first and continue to improve it later! Experience of using NXP Rapid IoT: ...
Why is it that when assigning a variable a value of 0, we can just write *ram = 0, but when assigning it a value of 0xffffffff, we need to write *ram = 0xffffffffu? The following is the specific code/...
One More Thing did not appear at Apple's fall conference as scheduled, and the confusing Apple AR glasses team did not seem to survive. With the obvious reduction of AR-related content at the confere...[Details]
Method of designing beautiful sound tube preamplifier based on 6n2
Assembling a tube preamplifier is the first choice for those who want to DIY tube amplifiers.
1. Key points of tub...[Details]
Industrial giants are technology-driven and vertically integrate the industrial chain; Internet giants are application-driven and horizontally break through. In the future, both will end up in the sa...[Details]
ROHM (headquartered in Kyoto, Japan) and ROHM Wako Co., Ltd. (headquartered in Okayama, Japan), two world-renowned semiconductor manufacturers, have decided to build a new plant at their Malaysian su...[Details]
The test circuit diagram is shown in Figure 1. There are two PN junctions between the gate G, the drain D and the source S. The drain and the source are symmetrical structures, showing pure resista...[Details]
I have been working on this i2c for several days. Many people on the Internet say that this is a problem with the ST package library, and they basically talk about the STM32F1 series of chips, and ev...[Details]
China Energy Storage Network News:
On December 24, the State Grid Corporation of China held a field promotion meeting on the ubiquitous dispatching and control of the source, grid, load and s...[Details]
Impedance selection of audio isolation transformer
The impedance selection of the audio isolation transformer needs to consider several factors, including the frequency range of the audio sign...[Details]
When you have the iPad you've always dreamed of, you'll also need the corresponding accessories, and these accessories are hard to ignore. Let's take a look at what accessories are:
1...[Details]
I. Common Questions
1. The header files reg51.h and reg52.h are actually the same, and you can use both.
2. The void before main() can be added or not, anyway, they are all functions...[Details]
At the 2022 I/O Developer Conference held last month, Google officially announced that the Pixel 7 series of mobile phones will be released this fall. However, recently an overseas blogger has expose...[Details]
In MPLAB IDE, when you select MPLAB SIM as the debugger, there is a simulator logic analyzer under the view menu. Before and after the program segment to be calculated in the program, add the same IO ...[Details]
Mobile power, as the backup power of many mobile devices, has also attracted much attention for its battery life. What is the right capacity? A capacity that is too small is not enough, and a capac...[Details]
Electric vehicles appeal to buyers for many reasons: They produce fewer emissions, cost significantly less to operate, and have better long-term prospects than gasoline-fueled cars.
However, o...[Details]
Mobile and portable
京公网安备 11010802033920号
EEWORLD
