Teaching with No Workpiece Required -- Quick and Easy Setting
There is no need for delicate sensitivity adjustments.
Simply adjust the optical axes of the Sensor and Reflector, then press
the Teaching
button
twice.
This high-reliability design eliminates
worries
about variations in the
sensitivity settings of different operators.
Industry Top
IP69K Degree of Protection with an SUS316L Housing
The housing is constructed of corrosion-resistant SUS316L,
and the display cover is PES (polyethersulfone) or PEI (polyetherimid).
Both materials are highly resistant to the effects of detergents and
disinfectants.
IP69K degree of protection also allows the E3ZM-B to
withstand
washing with
high-temperature, high-pressure
water.
This makes the E3ZM-B
well
suited to
use
in sites requiring a high
level of hygiene.
A Wide Ambient Temperature Range of
−40
to 60°C
This
wide
temperature range meets the needs of the many and diverse
applications in the
beverage
industry.
Applications
Detecting Plastic Bottles
The E3ZM-B@1/-B@6 are not applicable for detecting transparent objects that exhibit no birefringence, such as
glass bottles.
Transparent objects made of resin also exhibit little birefringence, and cannot be detected with complete stability.
Check the detection stability of objects such as these prior to actual operation.
Precautions for
Correct Use
2
E3ZM-B
Ordering Information
Sensors
[Refer to
Dimensions
on page 12.]
Sensing method
Appear-
ance
Sensitivity Connection
adjustment
method
Pre-wired
(2 m)
Connector
(M8, 4 pins)
Pre-wired
(2 m)
Connector
(M8, 4 pins)
Pre-wired
(2 m)
Connector
(M8, 4 pins)
Pre-wired
(2 m)
Connector
(M8, 4 pins)
Red light
Model
Sensing distance
Special
reflector
Order
separately
NPN output
E3ZM-B61 2M
E3ZM-B66
PNP output
E3ZM-B81 2M
E3ZM-B86
Teaching
type
E3ZM-B61-C 2M E3ZM-B81-C 2M
Included
E3ZM-B66-C
E3ZM-B86-C
E3ZM-B81T 2M
E3ZM-B86T
Retroreflective
with MSR function
One-turn
adjuster
type
500 mm
[100 mm]
*
Order
separately
E3ZM-B61T 2M
E3ZM-B66T
E3ZM-B61T-C 2M E3ZM-B81T-C 2M
Included
E3ZM-B66T-C
E3ZM-B86T-C
*Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Accessories
Special Retroreflective Reflector
(A Retroreflector is provided depending on the model number. Check the model number in the remarks column.)
[Refer to
Dimensions
on page 12.]
Name
Model
Sensing distance
(rated)
E3ZM-B@1(T)/-B@6(T)
Quantity
Remarks
A Reflector is provided with the E3ZM-B@@(T)-C.
A Reflector is not provided with the Sensor.
A Reflector is not provided with the Sensor.
The MSR function is enabled.
A Reflector is not provided with the Sensor.
The MSR function is enabled.
E39-RP1
Special Polarizing
Reflector
500 mm
[100 mm]
*
1
E39-RSP1
[0 mm]
*
250 mm
1
E39-RP37
250 mm
[0 mm]
*
1
Note: Previous OMRON Retroreflective Reflectors (E39-R1/-R1S/-R2/-R3/-R9/-R10/-R1K/-RS1/-RS2/-RS3, etc.) cannot be used with the E3ZM-B.
*Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
3
E3ZM-B
Mounting Brackets
A Mounting Bracket is not provided with the Sensor. Order a Mounting Bracket separately if required.
[Refer to
Dimensions
on E39-L/E39-S/E39-R, E39-L@.]
Appearance
Model
Quantity
Remarks
Appearance
Model
Quantity
Remarks
E39-L153
(SUS304)
*1
1
Mounting Brackets
E39-L98
(SUS304)
*2
1
Metal Protective Cover
Bracket
E39-L104
(SUS304)
*1
1
E39-L150
(SUS304)
1 set
(Sensor adjuster)
Easily mounted to the
aluminum frame rails
of conveyors and
easily adjusted.
For vertical angle
adjustment
E39-L43
(SUS304)
*2
1
Horizontal Mounting
Bracket
E39-L151
(SUS304)
1 set
E39-L142
(SUS304)
*2
1
Horizontal Protective
Cover Bracket
E39-L44
(SUS304)
1
Rear Mounting
Bracket
E39-L144
(SUS304)
*2
1
Compact Protective
Cover Bracket
Note: When using Through-beam models, order one bracket for the Receiver and one for the Emitter.
*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired Connector models.
*2. Cannot be used for Standard Connector models.
Sensor I/O Connectors (Sockets on One Cable End)
(Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
[Refer to
Dimensions
on XS3.]
Size
Specifications
Straight
*1
Appearance
2m
5m
2m
5m
Cable
Model
XS3F-E421-402-A
M8 (4 pins)
Standard
L-shaped
*1 *2
4-wire
XS3F-E421-405-A
XS3F-E422-402-A
XS3F-E422-405-A
Note: The outer cover of the cable is made of PVC (polyvinyl chloride), the nut is make of SUS316L stainless steel, and the degree of protection is IP67 (IEC 60529).
When high-pressure washing will be used, select an I/O Connector that has IP69K degree of protection.
*1. The connector will not rotate after connecting.
*2. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.
4
E3ZM-B
Ratings and Specifications
Sensing method
Model
Item
NPN output
PNP output
Retroreflective with P-opaquing (*1) and MSR functions
E3ZM-B61(-C)/-B66(-C)
E3ZM-B81(-C)/-B86(-C)
100 to 500 mm (Using E39-RP1)
500-ml, transparent, round PET bottle (65-mm dia.)
Sensor: 3° to 10°
Reflector: 30°
10 to 30 VDC, including 10% ripple (p-p)
450 mW max. (current consumption for a 30-V
power supply voltage: 15 mA max.)
25 mA max.
E3ZM-B61T(-C)/-B66T(-C) (*2)
E3ZM-B81T(-C)/-B86T(-C) (*2)
Sensing distance
Standard sensing object
Directional angle
Light source (wavelength)
Red LED (650 nm)
Power supply voltage
Current consumption
Control output
Operation mode
Protection circuits
Response time
Sensitivity adjustment
Ambient illumination
Ambient temperature
range
Ambient humidity range
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
*5
Connection method
Indicators
Weight (packed state)
Housing
Lens
Materials
Indication
Buttons
Cable
Accessories
*6
Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 2 V max.)
Open-collector output (NPN/PNP output depending on model)
Light ON/Dark ON cable switch selectable
Light ON/Dark ON switch selectable
Reversed power supply polarity, Load short-circuit protection, Mutual interference prevention,
Selection of the main control chip for Bluetooth bracelet1. Smart bracelets or smart watches not only have OLED, but also have Android or Apple systems. What are the main control chips? What brands of...
I found a small bug on ESP32/ESP8266. If you import a library, and then type __class__. after the library name in the repl and press the tab key (autocomplete function), it will cause the system to re...
[align=left][color=rgb(0, 0, 0)][font=Calibri, sans-serif][size=10.5pt]Today I will continue to share how to use the PWM module. Today I will use the PWM module to make a breathing light application a...
According to foreign media reports, Apple analyst Ming-Chi Kuo said in a research report that Apple plans to mass-produce a redesigned MacBook Air starting in the third quarter of 2022, which will be...[Details]
As time goes by, it is March 2021. In this March, various mobile phone manufacturers have announced that they will release their flagship mobile phones this month. It can be said that in this Ma...[Details]
0 Introduction
In process control and automatic measurement, some timing control pulses are often needed to trigger and shut down the work of different control units and functional compone...[Details]
With the release of MediaTek Dimensity 9000 and Qualcomm Snapdragon 8 Gen1, mobile phone manufacturers are bound to rush to install these two processors. From the end of last year to the beginning of...[Details]
On July 8, Liu Shu, vice president of product development at Arm China, disclosed the latest progress of the launch of its first and currently only self-developed 32-bit embedded processor IP "Star (...[Details]
In order to further improve the capacity layout of new energy battery shell business of Suzhou Slake Precision Equipment Co., Ltd. (hereinafter referred to as "the Company" and "Slake") and meet th...[Details]
The simulation circuit is as follows:
Circuit Description:
The keyboard is connected to port P1, 123 are column lines, 4567 are row lines. The LEDs of ports P2 and P3 are used to detect key pre...[Details]
STC's microcontrollers are generally 1T-type microcontrollers, which are about 12 times faster than traditional microcontrollers. Traditional 51 microcontrollers have only one clock source, which is ...[Details]
Cloud native is one of the key principles for enterprises to adopt cloud technologies to promote digital transformation. With the increasing deployment of containers, Kubernetes and the deepening o...[Details]
OnePlus has confirmed that it will soon launch its next flagship, the OnePlus 8T 5G. The company revealed the name of the phone on its social media Twitter and Instagram and announced that it i...[Details]
According to news released by Liuyang, the Changsha HKC 8.6th generation ultra-high-definition new display device production line project located in the Liuyang Economic Development Zone (High-tech Z...[Details]
On May 31, 2021, Meizu Technology (MEIZU) held an online new product launch conference this afternoon, officially launching the Meizu full-smartwatch MEIZU Watch and the rich accessories of Meizu's s...[Details]
Recently, the first mass production line of all-solid-state lithium batteries in China was officially put into production. This production line was invested and built by Beijing Pure Lithium New Energ...[Details]
Discrete Device
京公网安备 11010802033920号
EEWORLD
