The OP
Published on 2019-6-30 14:44
Only look at the author
This post is from RF/Wirelessly
Latest reply
L1 and C4 should form a high-pass filter, and C5 should only block the DC current;
The transmitting link L5 and C16 are notch filters, filtering about 125Mhz signals. The other C10, L13, C9 and L4 should be band-stopped. The filtered frequency band can be simulated. At the same time, L4/C14/C13 should also have an impedance matching function.
Details
Published on 2019-7-4 23:22
| ||
|
||
2
Published on 2019-7-4 23:22
Only look at the author
This post is from RF/Wirelessly
| ||
|
||
|
EEWorld Datasheet Technical Support