The internal circuit of SHM1100 II
Source: InternetPublisher:柯南道尔 Keywords: HM BSP Updated: 2021/03/18
SHM1100Ⅱ is packaged in a single row of 12 pins, with a frequency response of 10H to 200kHz. Its peripheral circuit is simple and
its working reliability is high. The internal circuit principle is shown in Figure 2-104.
As can be seen from the figure, the circuit is a direct-coupled desktop OCL circuit with differential input. Among them, VTs and VTg are
the overload and short-circuit protection circuits of the output tube, and VT12 and VT13 are the noise control circuits . The maximum output power of
SHM 1100Ⅱ is 100w, and the power supply voltage range is ±12V~±50v. The frequency response
is 10Hz~200kHz, the distortion is 0.01%, the input impedance is 33k{/, and it has overload, short-circuit protection and noise suppression functions.
- How to adjust the bass and treble of CXA1005
- TDA2009A power amplifier circuit
- The easy production of several top-quality tube preamplifiers
- 75W audio power amplifier made with TMOS150
- 6N5P tube direct-coupled single-ended amplifier
- Installation of electron tube differential amplifier circuit
- Auxiliary audio power amplifier circuit using LM4730/LM4731
- Dual power supply audio power amplifier circuit composed of LM3875
- Volume synchronization circuit constructed with discrete components
- Class A power amplifier circuit with an output power of 18W
- Set timing circuit when power is on
- strain sensor
- Inpatient pager circuit
- High-efficiency speaker circuit for rural stage
- Rural fish farming control circuit
- Agricultural small tractor lighting circuit
- Straw returning to field crusher circuit
- Farmland drainage automatic control circuit
- Double gate field effect transistor high frequency amplifier circuit
- Guest arrival signal recognition circuit