Servo motor control circuit
Source: InternetPublisher:newlandmark Keywords: Motor motor control circuit microcontroller BSP Updated: 2020/04/16
The control voltage of the servo motor is output by the microcontroller and sent to 0832 for D/A conversion. The converted analog quantity is amplified and
level converted and sent to the PWM power amplifier circuit. The generated PWM wave drives the motor to rotate.
A tachometer generator is used to measure the rotational speed of the motor, and after amplification, it is sent to 0809 for A/D conversion, and then sent to the microcontroller ; the angular displacement of
the motor is directly sent to the port of 8751 from a 9-bit absolute photoelectric encoder to determine the position. feedback. The speed
regulator and position regulator in the control system will be completed by the 8751 application program.
- A small improvement on the ordinary refrigerator motor starting circuit
- Replace the GE LOGIQ a200 ultrasound measurement key with a self-made touch switch
- A small improvement to the temperature and water level indicator alarm
- Manual automatic air compressor control circuit
- JDB-LQ-TQ/2 motor full voltage starting circuit
- Starting method of asynchronous motor with external frequency-sensitive resistor
- Design and analysis of the principle of automatic power-off switch during power outage
- Audio interface protection circuit
- Electric vehicle battery charging protection circuit
- Delayed electronic fuse
- Inpatient pager circuit
- Crop anti-frost circuit
- Integrated synchronous detector composed of analog multiplier MC1596
- Inductive feedback oscillator circuit
- Voltage series negative feedback amplifier circuit
- Second-order active band-stop filter circuit
- Wireless microphone circuit
- color discrimination circuit
- Small current generator circuit
- Home appliance repair signal generator circuit
京公网安备 11010802033920号