GE Reflective Memory PMC5565

tjthkj

GE Reflective Memory PMC5565 [Copy link]

PMC-5565 is a standard PMC bus reflective memory real-time interface board, suitable for 3U/6U CPCI/PXI bus. It is used for high-speed transmission of large bandwidth and massive data, and at the same time, it can achieve low-latency fast external event response and accurate synchronization of distributed multi-nodes. In the environment of successful application, it can transmit and share data at a deterministic high rate.

[Features] PMC bus interface, 32-bit/33MHz Supports DMA to read and write onboard memory data, real-time interrupt and real-time broadcast Node ID is set by jumper, a total of 256 nodes 128Mbytes onboard memory with checksum automatically adjusts the data packet size 4 to 64 bytes of data High sustained transmission rate 170Mbyte/s Very short data transmission delay, two nodes read and write maximum 750 nanoseconds Transmission distance can reach 300 meters for multiple membranes and 10 kilometers for single membranes Optional redundant transmission mode Supports ring connection and star connection Any data written to this node will be automatically synchronized with all nodes in the network in the same memory area. Before the update is completed, the network interrupt sent by this node to the remote node will not be triggered

[Advantages] Strong scalability, seamless upgrade to redundancy mode, stable data transmission with real-time connection, independent of operating system and processor, saves software development cost and cycle compared with standard communication and technology, lower management cost and higher anti-interference ability

[Software Support] Support WindowsXP, Win7 32, Win7 64, Vxworks, Linux, LabVIEW RT, RTX/RTX64 drivers provide standard DLL dynamic link library, support VC, VB, Delphi, CVI, LabVIEW and other standard development platforms

[Technical Specifications] 32-bit/33MHz, CPCI/PXI bus, PCI bus Working power supply: +5VDC

Working temperature: -40-85℃