[Erha Image Recognition Artificial Intelligence Vision Sensor] 1. Unboxing and Hardware Appreciation
[Copy link]
I would like to thank EEWorld for providing the opportunity to review it again, and I would also like to sincerely thank DFRobot for being able to review the Erha Image Recognition Artificial Intelligence Vision Sensor.
First, let’s appreciate the hardware.
After receiving the express, I started taking pictures. The product packaging is very careful, whether it is the product appearance or the barcode of the internal components, etc., it can be seen that the company is very serious about product configuration and related management, thumbs up.
The whole carton wrapped in plastic film looks pretty good, and the barcode and production date are very clear.
After disassembling the outer packaging, you can see three large items: the motherboard is on top, and two accessory bags are underneath the small cardboard.
Clear barcodes can be used to infer the standardized management of the company's products
It is a pity that the serial TTL connecting cable does not have a barcode. I guess it should be purchased from outside and should not be included in the company's internal inventory.
After further disassembly, the specific parts are as follows
The two metal parts on the right are connectors used to fix the motherboard. They can be adjusted to a certain angle. This is a very thoughtful consideration.
Motherboard part, here are some close-ups
After assembling the metal parts, you can use metal parts to fix the Erha Image Recognition AI Vision Sensor to avoid direct contact with your hands and prevent static electricity
It's just a pity that the space for the USB port is too small, and it's difficult to plug in the USB cable after installing the metal parts.
It is recommended that subsequent versions adjust the direction of the USB interface to facilitate connecting the USB cable.
Overall, the appearance of the entire product is very good and the design is very thoughtful.
|