When AD is routed, are there grid lines? Are there solid lines?

卢小宇

When AD is routed, are there grid lines? Are there solid lines? [Copy link]

---

qwqwqw2088

It should be in the routing sketch mode.

qwqwqw2088

Sketch mode has hollow lines, normal routing has solid lines, and there is also a hidden mode.

PCB interface

Shortcut key L

Set to Final

卢小宇

qwqwqw2088 posted on 2020-5-1 22:03 Sketch mode is hollow line, normal routing is solid, and there is also hidden mode. PCB interface shortcut key L is set to Final

Changed it but still the same

okhxyyo

Try ctrl+d to switch from sketch back to track.

qwqwqw2088

Lu Xiaoyu posted on 2020-5-2 08:42 It's still the same after the change

Probably not in sketch mode

Is the network checked in the PCB bread?

qwqwqw2088

qwqwqw2088 posted on 2020-5-3 08:57 It may not be the sketch mode. Is the network checked in the PCB bread?

Look at the picture on the first floor. Not all the lines are network.

Try it like this

In the lower right corner of the opened PCB diagram

Click on the PCB panel

qwqwqw2088

yichun417

Never encountered this situation

Laser1114

As shown in the picture, press 1 on the keyboard to switch between hollow routing and grid routing.