Altium Designer single-select and checkbox disproportion

littleshrimp

Altium Designer single-select and checkbox disproportion [Copy link]

Altium Designer single-select and checkbox disproportion

The right side of the dialog box is also missing, no matter how long it is stretched

I suspect it's related to WIN10 or the high-resolution screen. Other software don't have this problem.

qwqwqw2088

In win10, some graphics cards need to modify the custom resolution of AD software. The resolution does not need to be adjusted to the highest. The higher the resolution, the higher the distortion. In actual situation, it depends on whether the software window is blocked.

dcexpert

What's your display ratio setting?

littleshrimp

qwqwqw2088 posted on 2019-10-28 08:49 AD software in win10, some graphics cards need to modify the custom resolution, the resolution does not need to be set to the highest, the higher the distortion, the actual situation depends on the software...

It seems to be a headache. If the system resolution is not set to the highest, the displayed text will be blurred. After setting it to the highest, things still look too small.

littleshrimp

dcexpert posted on 2019-10-28 09:15 What is the display ratio you set?

The original setting was 124. After changing it to 100, AD displays normally, but other software including web content looks too small. I wonder why the single checkbox in AD is enlarged.

dcexpert

littleshrimp posted on 2019-10-28 09:33 The original setting of 124 was changed to 100. AD displays normally, but other software including web page content looks too small. I wonder why the single checkbox in AD will...

It may be a problem with AD itself. It is not well adapted to the similarity comparison. You can try another version.

littleshrimp

dcexpert posted on 2019-10-28 10:02 It may be a problem with AD itself. It is not well adapted to the similarity comparison. You can try another version

Maybe I will try it at 100% for a while and then try another version.

dcexpert

littleshrimp posted on 2019-10-28 13:15 I might try 100% for a while and then try another version if it doesn't work

I use AD10 and AD20, and there is no problem changing the display ratio.

littleshrimp

dcexpert posted on 2019-10-28 14:24 I use AD10 and AD20, and there is no problem with changing the display ratio.

I guess it's a version issue. I'm used to this one and haven't changed it. I'll try it when I get a chance.

dcexpert

littleshrimp posted on 2019-10-28 17:36 It's probably a version problem. I'm used to this one and haven't changed it. I'll try it when I have a chance

You can DIY a green version, so you don't have to worry about problems. Multiple versions can coexist without affecting each other.

littleshrimp

dcexpert posted on 2019-10-28 21:27 You can DIY a green version, so you don’t have to worry about problems. Multiple versions can coexist without affecting each other.

OK