桂花蒸

Single lithium battery mppt module

Overview

The single-cell lithium battery charging module using CN3791
has MPPT function .
The mppt voltage can be switched through different pads.
The constant current value can be set through the current detection resistor. The maximum 4A

has been verified and used normally. I share it for your reference.
The video tests the charging in 5v mode, and the effect is very obvious.
Some notes are written in the schematic diagram, and the chip manual is also in the attachment for
your reference.

Design Files

Related Devices

Devices	Class	introduce	Datasheet
RVE100UF35V67RV0072			Download
BAT54	Discrete semiconductor;Schottky diode	DC reverse withstand voltage (Vr): 30V Average rectified current (Io): 200mA Forward voltage drop (Vf): 1V @ 100mA	Download
MPCA-0630-100-M	Passive components;Power inductor	Accuracy: ±20% Rated current: 4.5A DC resistance (internal resistance): 62mΩ Inductance value: 10uH	Download
MHT192WDT-ICE	LED optoelectronic/LED;Light-emitting diodes (leds)	Illumination color: ice blue main wavelength/color coordinates: - yellow mist colloid, highlight ice blue light, coordinates X: 0.19, Y: 0.2, luminous angle: 120deg	Download
AO3407A	Discrete semiconductor;MOS (field effect tube)	Drain-source voltage (Vdss): 30V Continuous drain current (Id) (at 25°C): 4.1A Gate-source threshold voltage: 3V @ 250uA Drain-source on-resistance: 52mΩ @ 4.1A, 10V Maximum power dissipation ( Ta=25°C): 1.4W Type: P-channel -	Download
0603WAF7502T5E	Passive components;SMD resistor	Resistance (ohms): 75K Accuracy: ±1% Power: 1/10W Temperature coefficient: ±100ppm/°C	Download
0603WAF1203T5E	Passive components;SMD resistor	Resistance (ohms): 120K Accuracy: ±1% Power: 1/10W Temperature coefficient: ±100ppm/°C	Download
CN3791	Power/power management;Battery power management chip	Maximum supply voltage: 28V Fully battery pack voltage: 4.2V Type of rechargeable battery: Li-Ion Maximum charging current: 4A Number of battery cell packs: 1 4.5V~28V, 4A single-cell lithium with solar cell maximum power point tracking function Battery Charge Management IC	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 17:43:09

FPGA design pin allocation points.pdf
FPGA design pin allocation points.pdf
msp430 buttons to control LED lights in real time
I believe that everyone who has used 430 knows that its P1 and P2 ports have interrupt functions in addition to the functions of ordinary IO ports. So let's use its interrupt function to realize a sma
Design of PCI interface of single chip microcomputer based on CPLD
：This paper elaborates on a communication interface scheme between an 8-bit microcontroller and a PCI device using CPLD, and gives the main source code written in ABEL HDL. This scheme has been tested
Which one is more power-efficient, NB-IoT devices or Cat-M devices?
Improving the battery life of Internet of Things (IoT) devices is one of the main goals of low-power wide area network (LPWAN) technologies. Therefore, power saving features are an important part of c
TL5708 development board program writing, compiling, burning and running tutorial
##Tutorial on Programming, Compiling, Burning and Running of TL5708 Development Board###1. Programming of TL5708 Development Board Open the virtual machine Ubuntu file and find the directory of files
TI OMAP-L138 (fixed-point/floating-point DSP C674x+ARM9) expansion IO signal, baseboard B2B connector
CPU The three CPUs, OMAP-L138, TMS320C6748 and AM1808, are pin-compatible and have basically the same peripheral resources. TMS320C6748 TI TMS320C6748 is a low-power floating-point DSP processor. It s

Datasheet More

Circuits More