桂花蒸

virgo83 and WINDX

Overview

At that time, the price of 32u4 increased wildly, and then I used 32u2 as the main control. Now u4 is cheaper, and u2 is more expensive, so I just killed it and didn't want to optimize the board. So let it be. Disgusting wiring.
RGB hot-swap, support via.
Then the board is drawn in two parts, 65 and pad, connected with fpc terminals. The pad part also has the chip and c-port separation terminals. It can be used in conjunction or separately.
When connected together, it is the windx pad, and when separated, it is windx65 and a 17-key pad. Both support RGB and via functions.
Then, friends who want to play can go and make a board by themselves, and I will put the bom and other things in the attachment. You can also chat with me directly.

Design Files

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 12:13:13

Adafruit LIS2MDL Triple Axis Magnetometer Manual with Code
Recruiting embedded software development engineers
Headhunting Position [Shenzhen] Job Responsibilities: 1. Responsible for the design of UAV flight control embedded system architecture, module function development and verification; 2. Responsible for
485 Communication Problems
[color=#666666][font=Tahoma, Verdana, Arial,]I would like to ask an expert, does the common ground or non-common ground (isolation) of the two sides of 485 communication affect the communication dista
PS2 Interface.pdf
PS2 Interface.pdf
TDC - Time to Digital Converter
When using the delay chain in FPGA to implement tdc, when latching the output data of the delay chain, the input data change near the clock edge violates the setup and hold time of the trigger, causin
Problems with the amplifier analog signal output circuit
[Ask if you don't understand] Figures 1 and 2 are both recommended application diagrams for TPA3221. Figure 1 is in the application note, and Figure 2 is a typical application in the datasheet. [1] In

Datasheet More

Circuits More