Training

Location:Training / Embedded Development / Embedded operating system / Wei Dongshan Linux Graduation Class / Graduation Class Lesson 3 Section 4_Introduction to cropping and ECC of porting 3.4.2 kernel and making patches

You can log in to your eeworld account to continue watching：
Graduation Class Lesson 3 Section 4_Introduction to cropping and ECC of porting 3.4.2 kernel and making patches
Login

Chapter 1：Graduation Class Lesson 1, Section 1.1_The first stage of writing your own bootloader
Chapter 2：Graduation Class Lesson 1 Section 1.2_Writing your own bootloader - Stage 2
Chapter 3：Graduation Class Lesson 1 Section 2_Compilation Test of Writing Your Own Bootloader
Chapter 4：Graduation Class Lesson 1 Section 3_Improvement of writing your own bootloader
Chapter 5：Graduation Class Lesson 2 Section 1_First try of transplanting the latest u-boot
Chapter 6：Graduation Class Lesson 2 Section 2.1_Overview of the analysis and startup process of transplanting the latest u-boot
Chapter 7：Graduation Class Lesson 2, Section 2.2_Analysis of the Memory Distribution of the Startup Process of Transplanting the Latest U-boot
Chapter 8：Graduation Class Lesson 2, Section 2.3_Analysis of the startup process of transplanting the latest u-boot and relocation
Chapter 9：Graduation Class Lesson 2 Section 3.1_Modify the latest u-boot code and build a new board_Clock_SDRAM_UART
Chapter 10：Graduation Class Lesson 2 Section 3.2_Modify the latest u-boot code to support NAND boot
Chapter 11：Graduation Class Lesson 2 Section 3.3_Modify the latest u-boot code to support NorFlash
Chapter 12：Graduation Class Lesson 2 Section 3.4_Modify the latest u-boot code to support NandFlash
Chapter 13：Graduation Class Lesson 2 Section 3.5_Modify the latest u-boot code to support DM9000 network card
Chapter 14：Graduation Class Lesson 2 Section 4.1_Cut and modify default parameters of transplanting the latest u-boot
Chapter 15：Graduation Class Lesson 2 Section 4.2_Porting the latest u-boot supports burning yaffs image and making patches
Chapter 16：Graduation Class Lesson 3 Section 1_Framework Introduction and Simple Modifications for Porting 3.4.2 Kernel
Chapter 17：Graduation Class Lesson 3, Section 2_Modify the partition and create the root file system for transplanting the 3.4.2 kernel
Chapter 18：Graduation Class Lesson 3 Section 3_Porting the 3.4.2 kernel to support the yaffs file system
Chapter 19：Graduation Class Lesson 3 Section 4_Introduction to cropping and ECC of porting 3.4.2 kernel and making patches
Chapter 20：Graduation Class Lesson 4 Section 1_Transplanting the driver to the 3.4.2 kernel DM9000C
Chapter 21：Graduation Class Lesson 4 Section 2_Transplanting the driver to the 3.4.2 kernel LED and buttons
Chapter 22：Graduation Class Lesson 4 Section 3_Transplanting the driver to the LCD and input system of the 3.4.2 kernel
Chapter 23：Graduation Class Lesson 4 Section 4_Transplanting the driver to the 3.4.2 kernel block device and virtual network card

Duration：53 minutes and 28 seconds
Date：2014/01/01

Uploader：EE资深网友

Introduction

keywords： Linux Embedded

Speaker: Wei Dongshan, male, graduated from the University of Science and Technology of China majoring in electronics. He once worked for ZTE. Now he founded 100ask Baiwen Technology Company, dedicated to providing one-stop embedded learning solutions of "textbooks, forums, development boards, and emulators" plan.

You Might Like

Recommended Posts

Comparing Headphone Performance Using MEMS Microphone Testing: [font=微软雅黑][size=4]I used to like listening to music[/size][/font] [font=微软雅黑][size=4]I always felt that the bass effect of the earphones that came with my MP3 player was very poor[/size][/font] [font; littleshrimp MEMS sensors

【Qinheng Trial】V. ADC: [i=s]This post was last edited by lising on 2019-7-3 21:51[/i]This experiment uses the ADC module inside CH549 to collect the value of the temperature detection channel inside the chip, and then sends; lising DIY/Open Source Hardware

IRF830 Switching Characteristics: When IRF830 is used as a switch, can a 51 MCU be used as the gate driver? What is the G-pole voltage to ensure that the MOS tube is fully turned on?; newnxl Analog electronics

Help: How to obtain information on various packaging parameters?: I want to learn Cadence Allegro 17.2 software recently. I have a little understanding of some basic operations of Cadence. I can make holes, surface mount pads, through-hole pads, etc. The most troubl; bigbat PCB Design

Winbond 8-bit MCU baud frequency calculation tool: Very useful, thank you; rain MCU

Study on the control strategy of a novel current source three-phase five-level converter topology: Existing research on multilevel converters is mainly focused on voltage source converters[2](VSI for short), while research on current source converters[1](CSI for short) is relatively limited. This i; zbz0529 Power technology

Recommended Content

Hot VideosMore

Hot ArticlesMore

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews

Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函

京公网安备 11010802033920号