Teach you step by step how to learn microcontrollers, from easy to deep, with a total of 61 videos, teaching you how to transform from a novice to a master of microcontrollers.
I use the 4+3-bit DIP switch to let the user set two data at will, and the program reads the two data and then processes them accordingly. I group the 0~3 bits of the PC port and the 4~6 bits as a gro
[align=left][backcolor=rgb(238, 238, 238)][font=Verdana, Helvetica, Arial, sans-serif][size=12px]I just learned arm and want to make an arm-STM32 board myself. I have referred to many other masters' V
Due to time constraints, I only did a simple trial, so I'll summarize it before the end of the event. Often, the MCU required for some simple functions is not that powerful, as long as it is small, si
There is a small black dot in the middle of the front, which seems to be a camera or some other sensor. After opening it, the sensor is the 3-pin thing in the middle. JD R433A is written on the iron c
Figure 1 As shown in Figure 1, the output stage of the class-D amplifier adopts push-pull output. In order to reduce the high-frequency oscillation impact caused by the reverse recovery process of the
The previous post introduced adding hardware support to the TouchGFX interface to achieve a basic usable object. This post introduces how to connect the development board to Alibaba Cloud through the