• You can log in to your eeworld account to continue watching:
  • CMOS radar design and application
  • Login
  • Duration:29 minutes and 22 seconds
  • Date:2024/06/30
  • Uploader:桂花蒸
Introduction
keywords: circuit Millimeter wave
Course Introduction: This digital course covers three topics: microwave/millimeter wave active and passive circuits, microwave/millimeter wave signal source design, and radio frequency transceiver system parameters.

□ Course objectives: To train students to have a full understanding of radio frequency transceiver systems and circuits, and to provide students with design examples to understand the implementation of various key radio frequency circuits.

■ Course unit:
Unit 1. Frequency synthesizer
1-1 Introduction to frequency synthesizer
1-2 Frequency synthesizer architecture
1-3 Frequency control and switching speed
1-4 Frequency synthesizer model
1-5 Frequency response of frequency synthesizer
1- 6 Signal tracking and locking of frequency synthesizer
1-7 Frequency synthesizer’s frequency locking range and stabilization time
1-8 Phasor and phase noise analysis
1-9 Phase noise of frequency synthesizer
1-10 Stability of frequency synthesizer Degree
1-11 Fractional frequency synthesizer
1-12 Difference integral modulation fractional frequency synthesizer

Unit 2.
2-1 Power and gain expression method (Part1)
2-1 Power and gain expression method (Part2)
2-2 Phase noise (Part1)
2-2 Phase noise (Part2)
2-3 Common nonlinear parameters of RF transceiver systems (Part1)
2-3 Common nonlinear parameters of RF transceiver systems (Part2)
2-3 Common RF transceivers System nonlinear parameters (Part3)
2-3 Common nonlinear parameters of RF transceiver systems (Part4)
2-3 Common nonlinear parameters of RF transceiver systems (Part5)
2-3 Common nonlinear parameters of RF transceiver systems (Part6)
2 -4 Noise index and sensitivity (Part1)
2-4 Noise index and sensitivity (Part2)
2-4 Noise index and sensitivity (Part3)

Unit 3-1. Transceiver circuit and system
3-1 Part1 Transceiver-Signal Transmitting and Receiving
3-1 Part2 Transmitting End-Upconverter Mixer and Power Amplifier
3-1 Part3 Transmitting and Receiving End-Filter and Switch
3-1 Part4 Receiving End-Low Noise Amplifier and Down-frequency Mixer
Unit 3-2. Frequency Modulation Radar Design and Application
3-2 Part1 Frequency Modulation Continuous Wave Radar
3-2 Part2 Monopulse Radar
3-2 Part3 CMOS Radar Design and Application
Unit 3-3. Network Analysis and Its Application
3-3 Part1 Dual Port network-impedance and admittance parameters and their analysis on balun
3-3 Part2 Dual-port network-analysis of transmission matrix
3-3 Part3 Single-frequency power divider and dual-frequency rat path coupler
3-3 Part4 Miniaturization Coupler Design
3-3 Part5 Multi-port Measurement and Buried Method
Unit 3-4. CMOS Active Circuit
3-4 Part1 CMOS Low Noise Amplifier
3-4 Part2 Millimeter Wave CMOS Circuit Considerations
3-4 Part3 CMOS Power Amplifier
3 - 4 Part4 Double Push Voltage Controlled Oscillator
Unfold ↓

You Might Like

Recommended Posts

This is an entry-level driver problem. Could you please give me some advice? Thank you.
NTSTATUS HelloDispatch(IN PDEVICE_OBJECT DeviceObject, IN PIRP pIrp){NTSTATUS ntStatus = STATUS_SUCCESS;PIO_STACK_LOCATION IrpStack = NULL;DbgPrint("Hello: HelloDispatch");pIrp->IoStatus.Status = STAT
swaty Embedded System
What are the key points of using Tool-Graphs in CCS5 Debug mode?
[size=5]Enter CCS Debug mode, click the small arrow on the right side of the debug button to open the drop-down list, select Debug Configurations, and select Realtime Options->Halt the target before a
Aguilera Microcontroller MCU
overtake
[table=90%][tr][td]在一个沙漠中,有一个人骑著一头骆驼在一条公路上走著.过了一段时间後, 有一部汽车从他们後面行驶过来. 那个骑骆驼的人就下来,向那部汽车招了招手, 汽车停在他的面前. 那个骑骆驼的人就说了:"我在沙漠里走得好热了, 可不可以让我搭个便车, 吹吹冷气呀?"开车的人 Bryan 回答: "可以是可以啦! 不过, 你的骆驼怎麽办?"那个人说: "没关系, 它会跟在你车
??? Talking
MSP430G2553
After working hard all night, I finally realized my first program. I want to share my joy with you! [img]http://F:\DCIM\101___05[/img]
cqiang Microcontroller MCU
Construction of TI cc2541 protocol stack development environment
Due to project requirements, I learned about the Bluetooth 4.0 protocol stack development. In fact, it is just a modification based on the protocol stack made by TI. It is not too difficult and there
fish001 Wireless Connectivity
An experience of repairing TCD (transferred)
Since I changed my job to do instrument maintenance application, there have been many firsts: the first visit to the GC production workshop; the first installation and debugging; the first training of
wkj Test/Measurement

Recommended Content

可能感兴趣器件

完成课时学习+分/次

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号