Low power ink screen terminal
Author: qwert1213131
1. Introduction
Low-power IoT ink screen terminal
RSL10 is used as the main control, and the screen uses SHARP's LS013B7DH03 to display relevant info
qwert1213131onsemi and Avnet IoT Innovation Design Competition
This is my first time using ADS1248. I would like some advice from experts: What should I pay attention to when designing the ADS1248 parallel port output hardware? How to deal with GPIO2~7 that are m
I have received the board. Today I will do the unpacking and lighting test, and then do other tests later.Let's take a look at the board first. The board still has a strong national technical design s
[i=s]This post was last edited by Hot Ximixiu on 2020-9-1 21:05[/i]Compared with MSP430 (F149), MSP430 (F5529) has more powerful functions.
UCS IntroductionThe UCS of the MSP430F5XX/MSP430F6XX series
After I initialized the serial port 4 in the program, I immediately sent data in query mode, uart4_send(0xAA); It works. But I then added the following contentRCC-APB2ENR|=14; //PORTC clock enableGPIO