[table=98%] [tr][td]I use the comparison mode of TImer-A to control the output PWM waveform to control the DC motor. I want to measure the number of pulses of the square wave returned by the optocoupl
I am making a boost module that can drive a MOS full bridge (to drive a DC motor). Since the DC current source is only a 7.2V battery, the full bridge is driven by IR2103, and the driving voltage is 1
In the wince system, I wrote a linked list class to store a large amount of data received from the serial port. These data are deleted after processing. Will this cause a lot of fragmentation in the l
Environment: WINCE ARM11 Device: Mesh V2000, OV511+USB camera Resource: Refer to the WINCE_OV511 on the Internet, the one with driver+host computer+PPT explanation Test results: YUV420->RGB image is a
BlueNrg-1 is used as a slave device, and Raspberry Pi is used as a master device. Raspberry Pi can successfully connect to BlueNrg-1 device. BlueNrg-1 can correctly receive the data sent by Raspberry
When you face workplace pressure, learn the following "10 steps" and you will definitely be able to turn pressure into motivation and eliminate pressure invisibly. The first step is spiritual transcen