• You can log in to your eeworld account to continue watching:
  • Operating principle of three-phase asynchronous motor 6
  • Login
  • Duration:46 minutes and 55 seconds
  • Date:2021/03/20
  • Uploader:Lemontree
Introduction
keywords: Motor transformer
"Electrical Engineering" at North China Electric Power University is a major professional basic course in the electrical engineering discipline. It is highly theoretical and closely related to engineering practice. This course takes four typical motors: transformers, synchronous motors, asynchronous motors, and DC motors as the learning objects. The content covers: the basic structure, working principle and operating characteristics of the motor; the basic electromagnetic relations and basic analysis methods of the motor, including: electromotive force equation, magnetic motion Potential balance relationship, power and torque balance equations, equivalent circuits, phasor diagrams; properties of electromotive force and magnetomotive force of motors and their relationship with time and space; basic experimental methods of motors. Through the study of this course, you can master the basic theory and basic analysis methods of electric motors, laying a solid foundation for further studying professional courses and engaging in professional work.


Unfold ↓

You Might Like

Recommended Posts

NTSC and PAL camera debugging
I have been debugging cameras recently, both NTSC and PAL. The goal is to clearly display the information collected by the camera on the LCD. The original size of the camera signal is 720*575 and 720*
雪枫21 Automotive Electronics
Newbie needs help regarding STM32 DA! ! ! !
I want to implement software-triggered DA output. But no matter how I change the input value, the measured output voltage does not change much, and the output cannot be 0v. Please help me... Thanks...
光头 MCU
Help! Urgent! ZStack goes into an infinite loop after serial port triggering! The indicator light on the development board keeps flashing! Urgent!
I just learned zigbee and don’t know how to use zstack message passing, so I blocked the message osal_msg_send in MT_UART.c, and then directly passed the serial port data received in the message struc
QHYESTY RF/Wirelessly
Please help me write a C program with pictures
The one in the picture is 18b20, but the real thing is not the real thing. It is a temperature and humidity integrated sensor. Please help me urgently! ! !~~~
摩卡 51mcu
Why does a signal with very little noise introduce high-frequency noise after passing through a first-order active low-pass filter?
Why does a signal with very little noise introduce high-frequency noise after passing through a first-order active low-pass filter? (The signal is input from the left, amplified, and then filtered. Th
caijianfa55 Analog electronics
Verilog help! !
When I was learning Verilog, I came across an example that I didn't understand. Please help me: The example is as follows: module f1 ( y1, y2, clk, rst); output y1, y2; input clk, rst; reg y1, y2; alw
ggch Embedded System

可能感兴趣器件

完成课时学习+分/次

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号