The first issue - Zero Basics Introduction - 47 episodes The second issue - Kernel Programming - 20 episodes The third issue - Bare metal development - 21 episodes The fourth issue - Driver development - 82 episodes available
I am going to use the laser ranging module and need to count microseconds. I use timer 4 and set the time to 1um. I add 1 to the variable every time it is interrupted. When testing, I first clear the
Digitally controlled DCDC converter
1 Introduction :This design is a digital control DCDC converter . MCU is used to control the output voltage of the DCDC converter to achieve the purpose of digital
I have just been using Micropython for more than two weeks. In the past two weeks, I have mainly followed the documentation tutorials and run some programs. In my spare time on weekends, I used Visio
Set the connected network WLAN6 Set the Ethernet shared to the development boardSet the development board to automatically obtain the IP:
# udhcpc -i eth0
Check whether you are connected to the Intern
RS-232 serial interface standard Currently, RS-232 is the most widely used serial interface in PC and communication industry. RS-232 is defined as a single-ended standard that increases the communicat