Broadband shared power controller circuit
Source: InternetPublisher:清宁时光 Keywords: Broadband power controller controller circuit network cable Updated: 2021/06/03
Circuit working principle: The controller takes power from the USB of the computer.
Insert one end of the USB data cable into the USB interface of the computer. Cut the other end and take out the red wire (+) and
black wire (1) and connect it to a DC (direct current) power plug. Insert any connector
U from J1 to J4, and other users will connect in turn. If the distance is slightly further, you can use the free wire of the network cable
to carefully peel off the network cable. You can also clearly see the arrangement and color of the network cable
through the crystal plug
. Articles 7 and 8 are used here.
- DIY a practical audio-visual doorbell
- Ways to deliver more than 100A to ADAS processors
- What components and functions does the battery management system consist of?
- Four water tower control schematic diagram
- Secret code lock circuit
- Music calendar using SMC6S37
- Electronically controlled fuel injector test circuit
- EKG FM Demodulator Circuit
- Stapler control circuit
- Poultry warming temperature control circuit
- Street light automatic controller circuit using power switch TWH875
- Photoelectric controller circuit with anti-interference capability
- Simple water level controller circuit (2)
- Chandelier brightness controller circuit using relay 2
- Industrial four-way programmable controller circuit
- Password controller circuit b
- Multifunctional password controller circuit a
- Broadband Preamplifier Circuit
- SSB broadband linear power amplifier
- Broadband buffer circuit
京公网安备 11010802033920号