Laser transmitter and sending circuit
Source: InternetPublisher:D先生 Keywords: laser transmitter laser fiber optic Updated: 2020/06/22
Since optical fiber has the characteristics of long distance signal transmission and low transmission loss, in recent years, optical fiber has been used to replace coaxial cables for
the transmission of television signals and data signals. There is a laser transmitter at the transmitting end of the transmission, which turns the electrical signal to be transmitted into a laser signal. The laser signal is transmitted through the optical fiber
. At the signal receiving end, the optical signal is converted into an electrical signal through an optical receiver. As shown in the figure: Typical laser transmitter and transmitting
circuit .
- A small improvement to the temperature and water level indicator alarm
- JDB-LQ-TQ/2 motor full voltage starting circuit
- Using P110C to control 6 DC motors simultaneously
- Simple phase failure protection circuit composed of intermediate relay
- Design and analysis of a four-bit remote control component capable of remote reset
- A novel and practical power line anti-theft and cutting alarm circuit
- Homemade anti-theft watchdog
- Password type motorcycle anti-theft device
- Simple disconnection burglar alarm
- Home thermostat
- Homemade disinfectant circuit
- High-rise residential walkway lighting control circuit
- sound control circuit
- PLC chain alarm control circuit used in production process
- PLC transmission line automatic reclosing control circuit
- Microwave heating component control circuit schematic diagram
- Range hood detection control circuit
- Humidity detection box control circuit in greenhouse
- Automatic sprinkler irrigation control circuit
- DC variable speed motor controller circuit diagram using optical fiber