introduction In the post-PC era of rapid development of digital information technology and network technology, embedded systems have been widely infiltrated into scientific research, engineering de
First create a project, then run MCC, you can see the following interface.Right click on PF5 to set the GPIO mode.Select Pin Module on the left to modify the name of the GPIO.Then in the Libraries in
Chip AU1500 series 64-128 memory clock module IDE hard disk interface with J debugging peripheral interface dual 10-100M network card USB1.0 one printer port four-layer board BOM cost within 700 board
I have seen many C language example programs that use the so-called bare metal C program, that is, before calling Main() (you can use other names), you need to use assembly code to do some moving work
The quickest way to repair a minor audio fault is to input the AV signal to confirm the scope of the fault. If the sound of the input AV signal is normal, it means that the fault is in the intermediat
The measurement of rotor lift is very critical in the installation of steam turbine generators, but the existing detection methods lack accuracy and stability. By analyzing the accuracy requirements a