• You can log in to your eeworld account to continue watching:
  • A brief summary of the I2C project
  • Login
  • Duration:2 minutes and 15 seconds
  • Date:2019/12/09
  • Uploader:JFET
Introduction
keywords: FPGA ModelSim UDP quartusii

This set of courses is a recorded course of Xiaomei’s field training class in 2019. It is rich in content, high in knowledge, and carefully edited, so the viewing experience is good.

The course content is arranged as follows:

Basic solidification stage (Lessons 1 to 21).

This stage mainly uses some simple examples of theoretical background knowledge as the basis for course development, allowing students to start with basic lighting and understand step by step how Verilog designs FPGA digital logic. Common methods and techniques. A few seemingly inadvertent experiments, according to the arrangement of our course content, you will find that by doing it, you will have mastered the core of the linear sequence machine and the design and use of the state machine. Everything was so natural, but it came naturally. Not only did I understand the principles and methods, but I also realized the advantages of these design methods and mastered the skills of using these design methods.

At the same time, this stage is also a debugging ability development stage. Through these not-too-difficult experiments and courses, students can gradually learn and practice how to use modelsim to simulate the designed code and how to debug it. In the eyes of many people, simulation is just a means to verify whether the results are correct. In fact, the greater role of simulation is to assist debugging. When the simulation results are not as expected, how to analyze the root cause of the problem and how to use simulation and debugging skills Find the problem.

System modeling stage (Lessons 22 to 42)

This stage uses simple but comprehensive examples to raise the issue of collaborative work between multiple modules, and how to design reasonable interfaces so that each module can correctly interact with Other modules communicate with each other and exchange data. When the system design encounters problems, how to analyze and debug them one by one.

The example strengthening stage (lessons 23 to 70)

starts from the implementation of I2C protocol, to the debugging of camera image collection and display system, to the implementation of simple image conversion algorithm, from the implementation of Gigabit Ethernet underlying protocol to the implementation of Ethernet image transmission. Organically combine protocols with strong practicability and rich knowledge points to realize a practical Ethernet image transmission system.

Applicable objects:

Suitable for undergraduates, graduate students, working students or engineers in electronic information, communications, mechanical electronics and other related majors. It is emphasized that it must be a group with the purpose of self-study.

Unsuitable people:

1. People who are in a hurry and want to get things done quickly in a few days. (Maybe there is such an expert in the world who can help you learn FPGA quickly in a few days, but at least Xiaomei does not have this ability)

2. People who just watch the videos and think that they can learn it, and are unwilling to practice according to the course arrangements. (The course shares knowledge and experience, but developing FPGA requires the ability to write code, verify and debug. How to transform knowledge and experience into abilities? There is no shortcut, just practice! Practice! Practice! Practice!) 3.

Endurance Poor: Those who are unwilling to persevere when encountering difficulties, unwilling to study, and unwilling to make breakthroughs. (FPGA learning inherently has a bottleneck period for breakthroughs. This bottleneck period is very difficult. Often a small project may take several days to debug, even rewrite, and self-study. It inherently lacks the necessary external constraints. If there are no more Perseverance, without the courage to challenge difficulties, it will be really difficult to learn).

4. Project requirements: I found that some of our series of tutorials just meet the project requirements. (This type of user has a strong purpose in learning, and only cares about what he needs, and has no time to take into account a lot of basic content and foreshadowing. As a result, he did not learn the previous ones and could not keep up with many subsequent knowledge points, which are related to other projects. (You can’t digest the lessons)

The master leads you in. It depends on the individual’s practice. When we hold on-site training classes, all the content we teach is recorded in the video. When you watch the video for self-study and participate in our offline training classes, you will hear and see exactly the same content. The trainees are in a centralized environment and study intensively within a concentrated period of time without any distractions. So after 7 weeks, everyone has learned and can write and debug code independently. The most difficult thing about offline self-study is persistence and concentration. Therefore, whether you can learn it depends not on how good the tutorial is, but on the determination and perseverance of the learner.

I hope everyone will study hard and ask questions if you have any.


Unfold ↓

You Might Like

Recommended Posts

IAR burning program shows error
When I use IAR to program MSP430FR5994, the following error occurs. How to deal with it? There is no error in the compilation.
wml123 TI Technology Forum
Application of state machine principle in control program design.pdf
Application of state machine principle in control program design.pdf
zxopenljx EE_FPGA Learning Park
The board has been mailed, please check the courier number in the post~
Dear friends, we have mailed the boards to the forum members who have confirmed their participation~How to check the express delivery number: Log in to the forum and clickQuery Express to check (you c
EEWORLD社区 onsemi and Avnet IoT Innovation Design Competition
I can't find any information about these two chips.
From searching online, I found that it is a driver optocoupler used in inverters, but I can't find the relevant datasheet. The content above is very simple A T350 1020. This device is in TO-220 packag
呜呼哀哉 Analog electronics
[Project source code] Determine the correspondence between the dedicated clock input pin of the FPGA and the PLL
This article and design code were written by FPGA enthusiast Xiao Meige. Without the author's permission, this article is only allowed to be copied and reproduced on online forums, and the original au
小梅哥 Altera SoC
MCU + I2C communication response signal is abnormal
Use Proteus to simulate the I2C communication between 89C52 and 24C02, and read the data written into 24C02 to light up the LED controlled by P1; it is found that the LED light in Proteus cannot light
elec32156 51mcu

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号