• You can log in to your eeworld account to continue watching:
  • System status response and output response (1)
  • Login
  • Duration:24 minutes and 36 seconds
  • Date:2019/01/11
  • Uploader:抛砖引玉
Introduction
This series learns the theoretical meaning and operation methods of linear systems by studying the state space, state space, transfer function matrix, etc. of linear systems. Use the state space method as the main tool to study the theory of multi-variable linear systems. After the 1950s, with the development of aerospace and other technologies and the expansion of the application scope of control theory, the limitations of classical linear control theory have become increasingly obvious. It can neither meet practical needs nor solve some problems raised by the theory itself. This has promoted The study of linear systems began, and it developed from the classical stage to the current stage after 1960. American scholar RE Kalman first applied the state space method to the study of multi-variable linear systems and proposed two basic concepts of controllability and observability. After the 1960s, modern linear system theory has made new developments, and new theories and methods for studying multivariable systems have emerged, such as linear system geometric theory, linear system algebraic theory, and multivariable frequency domain methods.

Unfold ↓

You Might Like

Recommended Posts

The problem of the total distortion increasing after the signal passes through the op amp filter circuit
[i=s]This post was last edited by flyriz on 2020-12-26 22:15[/i]Hello everyone, I am designing an acoustic measurement amplifier, which has a signal amplification output function. The amplifier circui
flyriz Analog electronics
Help - Graduation Project of Intelligent Robot Based on Single Chip Microcomputer Control
My graduation project is a wheeled robot controlled by a single-chip microcomputer, that is, a car controlled by a single-chip microcomputer, but I don't know how to do it. I hope you can give me some
miss0505 MCU
FPGA implementation of the design of RU algorithm encoder (LDPC encoder)
FPGA implementation of the design of RU algorithm encoder (LDPC encoder)
雷北城 Altera SoC
[NXP Rapid IoT Review] + Laptop Bluetooth Interaction with Rapid IOT
[i=s]This post was last edited by flyword on 2019-1-12 18:37[/i] The ultimate goal of this evaluation is to simply implement a web application and obtain the parameters of the environmental sensor by
flyword RF/Wirelessly
GPIO Operation of TMS320C6748
1. GPIO characteristics of TMS320C6748 Referring to the 1.2Features section of the TI technical document SPRUFL8B (TMS320C674x/OMAP-L1x Processor GPIO User's Guide), we can see that the GPIO of the TM
fish001 Microcontroller MCU
Jingzao Wireless Charging Mouse Pad Disassembly Report
[i=s]This post was last edited by Buyixin on 2021-12-19 18:10[/i]Jingzao Wireless Charging Mouse Pad Disassembly ReportWritten in front: Thanks to EEWORLD for providing free sample disassembly. This i
不亦心 Power technology

推荐文章

基于改进神经网络的非线性系统观测器设计 2011年09月05日
近年来,鉴于神经网络的特性和发展潜力,神经网络成为研究的热点之一。伴随着控制对象复杂性的提高,系统存在的不确定因素和难以确切描述的非线性特性也随之增多,神经网络的研究和发展显得尤为重要。与传统控制系统状态观测器相比,神经网络状态观测器具有更强的逼近非线性函数的能力和容错性,尤其适用于多输入多输出系统。 与线性定常系统中的设计 相比,本文是在非线性系统中利用前馈神经网络...
离散随机线性系统的可观性和可控性 2008年10月23日
  1)    离散随机线性系统的可观测性和可控制性   对于上述离散随机线性系统   Xk=FXk-1+TUk   Yk=HXk+Nk   定义系统的可观测性和可控制性分别如下:   l     可观测性:给定控制后,能在有限的时间间隔内根据系统输出惟一地确定系统的所有起始状态,则系统是完全可观。如果只能确定部分起始状态,则系统不完全可观。   l    ...

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号