Recently, the California Public Utilities Commission (CPUC) approved Waymo's expansion request, allowing them to operate on Los Angeles, the San Francisco Peninsula and San Francisco highways, and allowing them to charge passengers in these areas. In addition, the CPUC instructed Waymo's driverless cars to travel at a maximum speed of 65 miles per hour and there is no upper limit on the size of the fleet.
Waymo takes conservative approach to driverless car expansion
While Waymo has received final permission to operate in San Francisco since August 2023, it has reserved the service only for those who have been approved by the waitlist. According to the California Department of Motor Vehicles (DMV), Waymo operates 438 driverless cars in California for testing and commercial operations. According to the San Francisco Chronicle, Waymo has 250 driverless cars in its commercial fleet in San Francisco.
The reason for Waymo's conservative approach to expansion is obvious - it does not want to repeat the mistakes of its rival Cruise, which received final approvals at about the same time as Waymo, but had different fates.
According to the California DMV, Cruise has deployed 510 driverless cars across the state. But a few months after Cruise received its final license, the company was temporarily suspended by California authorities for allegedly concealing accident information. Since then, the city of San Francisco has filed a lawsuit against the California Public Utilities Commission (CPUC), the organization responsible for regulating autonomous vehicles in the state, demanding a significant reduction in the number of robot taxis on the city's roads.
This undoubtedly casts a shadow on the entire industry.
Meanwhile, local lawmakers are seeking to increase regulation of driverless vehicles. Several regions, including Los Angeles and San Mateo County, are pushing to give local governments more control over the deployment of self-driving taxis.
Safety hazards are difficult to eliminate
Safety issues have always been the biggest stumbling block in the development of autonomous driving technology.
In February 2024, a Waymo driverless vehicle collided with a cyclist in San Francisco. Although the accident seemed minor, it undoubtedly once again raised public doubts about the safety of this technology.
To ensure safety, Waymo claims that it uses a multi-sensory and predictive system that can monitor the surrounding environment 360 degrees in advance and make judgments and responses to possible situations. However, in a real and complex road environment, any small mistake may lead to serious consequences.
In addition, Waymo, like other companies, is working to teach its self-driving system how to deal with special traffic participants, such as cyclists and pedestrians. However, this process is not easy and requires a lot of money and time to collect feedback and optimize algorithms. How to ensure that self-driving vehicles can operate safely and reliably in all situations remains a daunting challenge for the industry.
The public is put to the test
In addition to technical issues, self-driving taxis also face the challenge of public acceptance. Even though Waymo is committed to promoting the convenience and safety of self-driving technology, some people still have doubts about this new model.
On the one hand, any safety accident will inevitably arouse strong public attention and criticism; on the other hand, vulnerable traffic participants such as cyclists and pedestrians may also have concerns about self-driving vehicles. From the public's perspective, they need more time to build confidence in this new technology.
Last words
Ultimately, safety is the core issue for driverless cars. The recent safety accident has aroused strong concern. Waymo needs to use time and strong measures to avoid such accidents, otherwise it will face considerable resistance in future market promotion.
Landing in Los Angeles, Waymo faces more complex challenges. As a car city, Los Angeles has a large number of vehicles and a dense population. Vehicles need to adapt to more driving scenarios and their stability needs to be further improved.
Currently, autonomous driving technology is experiencing a period of great pressure and turbulence. As a leader, Waymo's expansion path is not smooth sailing, and it must face challenges head-on.
Previous article:Humanoid robot manufacturer suddenly changes leadership to prepare for large-scale mass production
Next article:Hundreds of millions of yuan in financing! Cleaning robots are "blooming outside the wall" and going overseas?
- Popular Resources
- Popular amplifiers
- Using IMU to enhance robot positioning: a fundamental technology for accurate navigation
- Researchers develop self-learning robot that can clean washbasins like humans
- Universal Robots launches UR AI Accelerator to inject new AI power into collaborative robots
- The first batch of national standards for embodied intelligence of humanoid robots were released: divided into 4 levels according to limb movement, upper limb operation, etc.
- New chapter in payload: Universal Robots’ new generation UR20 and UR30 have upgraded performance
- Humanoid robots drive the demand for frameless torque motors, and manufacturers are actively deploying
- MiR Launches New Fleet Management Software MiR Fleet Enterprise, Setting New Standards in Scalability and Cybersecurity for Autonomous Mobile Robots
- Nidec Drive Technology produces harmonic reducers for the first time in China, growing together with the Chinese robotics industry
- DC motor driver chip, low voltage, high current, single full-bridge driver - Ruimeng MS31211
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- [nRF52840 DK Review] Improve custom services - send data
- Please recommend a cheap io expansion chip iic spi can be used for keyboard and led indication
- Application of high-precision current source in gyroscope testing
- Young people have no moral principles and do not consider production capacity in via impedance design
- Bike modification series: button
- Introduction to cache operation interface of Allwinner V85 development board RTOS platform
- During the Chinese New Year, we can talk about job plans.
- As a former smart wear developer, I prefer smart rings.
- Developers use experiments and data analysis
- Simplifying Voltage and Current Measurements in Battery Test Equipment