After several years of development, ARGB lighting system gradually replaced RGB, mainly because ARGB lighting effect is really beautiful. In the past, keyboard, mouse, chassis, fan, graphics card, memory can be said to have been occupied by lighting, while the 2.5-inch SSD field has always been forgotten. Although some manufacturers have launched luminous SSDs, there is still no significant improvement.
Of course, there is a manufacturer that insists on this - Team Group. This time, Team Group has brought you a brand new luminous SSD solid state drive - Team Group DELTA MAX Magic Mirror ARGB SATA3 solid state drive. The biggest difference is that it has been upgraded from RGB to ARGB, and it supports Aura Sync, which is more playable. Today we will learn about this SSD solid state drive and see what surprises it will bring us!
The packaging of Team DELTA MAX Magic Mirror ARGB SATA3 solid state drive is still very gorgeous. After all, this is a product that supports ARGB lighting effects. It is more outstanding than the RGB lighting effect. The pattern on the packaging box shows that this solid state drive has two styles, one with ARGB turned on and the other with the lights turned off. This SSD has 250GB, 500GB, 1TB and 2TB capacities, and the hard drive uses a SATA 6Gbps interface. It supports 5V Aura Sync and motherboard USB power supply.
On the back are some technical parameters and features of this SSD. If you want to know more, you can read it carefully. In addition, the official data is that the maximum read speed is 560MB/s and the maximum write speed is 510MB/s, but this refers to the version above 500GB. The maximum write speed of 250G is 500MB/s. For a SATA interface solid state drive, the speed is already at the top. In addition, this SSD is undoubtedly the exception of the four major motherboard manufacturers (ASUS, ASRock, GIGABYTE, MSI)!
Previous article:144-layer QLC (quad-level cell) NAND is expected to be available in 2020
Next article:The SSD engineering machine displayed by Tsinghua Unigroup may be the fastest solid-state drive currently
- Popular Resources
- Popular amplifiers
- Detailed explanation of intelligent car body perception system
- How to solve the problem that the servo drive is not enabled
- Why does the servo drive not power on?
- What point should I connect to when the servo is turned on?
- How to turn on the internal enable of Panasonic servo drive?
- What is the rigidity setting of Panasonic servo drive?
- How to change the inertia ratio of Panasonic servo drive
- What is the inertia ratio of the servo motor?
- Is it better for the motor to have a large or small moment of inertia?
Professor at Beihang University, dedicated to promoting microcontrollers and embedded systems for over 20 years.
- LED chemical incompatibility test to see which chemicals LEDs can be used with
- Application of ARM9 hardware coprocessor on WinCE embedded motherboard
- What are the key points for selecting rotor flowmeter?
- LM317 high power charger circuit
- A brief analysis of Embest's application and development of embedded medical devices
- Single-phase RC protection circuit
- stm32 PVD programmable voltage monitor
- Introduction and measurement of edge trigger and level trigger of 51 single chip microcomputer
- Improved design of Linux system software shell protection technology
- What to do if the ABB robot protection device stops
- Detailed explanation of intelligent car body perception system
- How to solve the problem that the servo drive is not enabled
- Why does the servo drive not power on?
- What point should I connect to when the servo is turned on?
- How to turn on the internal enable of Panasonic servo drive?
- What is the rigidity setting of Panasonic servo drive?
- How to change the inertia ratio of Panasonic servo drive
- What is the inertia ratio of the servo motor?
- Is it better for the motor to have a large or small moment of inertia?
- What is the difference between low inertia and high inertia of servo motors?