[linux kernel] Kernel graphical cropping configuration-EEWORLD

Collect

[*] Use ext4 for ext2 file systems

[*] Network File Systems --->

<*> NFS client support

<*> NFS client support for NFS version 2

<*> NFS client support for NFS version 3

<*> NFS client support for NFS version 4 //Network file system, 18.04 Linux corresponds to version 04 of NFS

[*] Root file system on NFS //Supports booting from NFS, which is very convenient for debugging character drivers.

No need to copy, can be shared and run directly

[1] [2]

Keywords：linux kernel Reference address：[linux kernel] Kernel graphical cropping configuration

Previous article：[linux kernel] The pitfalls of ksz9031 driver debugging under the kernel
Next article：[linux kernel] Kernel transplant process record

Recommended ReadingLatest update time:2024-11-16 14:44

Video detection solution based on DSP with Linux as the system

Video detection technology has been widely used in many fields such as industrial control, intelligent transportation, and equipment manufacturing. Traditional video detection often uses industrial computers as its video processor to realize its functions. This method is often unable to realize video detection in di

[Embedded]

Linux exception handling architecture

In most processors after ARM V4 and V4T, the interrupt vector table can have two locations: one is 0 and the other is 0xffff0000. This can be controlled by the V bit (bit ) in the CP15 coprocessor c1 register. The correspondence between V and the interrupt vector table is as follows: 0x00000000~0x0000001C / 0xffff00

[Microcontroller]

基於tiny4412的Linux內核移植--- 中斷和GPIO學習（2）

平臺 tiny4412 ADK Linux-4.4.4 u-boot使用的U-Boot 2010.12，是友善自帶的，爲支持設備樹和uImage做了稍許改動 platform tiny4412 ADK Linux-4.4.4 U-Boot uses U-Boot 2010.12, which is provided by Friendly. It has been slightly modified to support device tree and uImage. 我們以控制tiny4412上的LED1和LED2爲例，使用的GPIO是GPM4_0和GPM4_1對應的原理圖如下： The datash

[Microcontroller]

ARM-Linux interrupt analysis

In the ARM architecture, reset, interrupt, fast interrupt, etc. are all considered "exceptions". When these "exceptions" occur, the CPU will look for instructions at fixed addresses. Their corresponding addresses are as follows: Address Exception Type Operation Mode on Entry 0x00000000 Reset Super

[Microcontroller]

Realization of real-time network communication and LCD display in ARM11 embedded system

0 Introduction The main frequency of ARM11 is 533 MHz, and the highest frequency can reach 667 MHz, which is 10 times higher than that of ARM7. It also has more abundant on-chip resources, faster processing speed and stronger functions. Based on the above characteristics, ARM11 can fully adapt to the design of networ

[Microcontroller]

Realization of real-time network communication and LCD display in ARM11 embedded system

Linux Embedded - Bootloader, Uboo

1. Bootloader Function The boot loader in a PC consists of BIOS (which is essentially a firmware program) and GRUB or LILO. After completing hardware detection and resource allocation, BIOS reads the boot loader from the hard disk into the system memory and then hands over control to the boot loader. The main t

[Microcontroller]

Static/dynamic integrated debugging mode of embedded LINUX system

In the current embedded LINUX system development process, all engineers are tired of using two different debugging modes to debug the system kernel and application respectively. First, a JTAG debugging tool is used to configure and start the LINUX system; after the embedded LINUX system runs normally, GDB is used to

[Microcontroller]

Static/dynamic integrated debugging mode of embedded LINUX system

OK6410A development board (eight) 96 linux-5.11 OK6410A file access open-mmap-close

The mmap function used in user space is provided by glibc Statement found through man mmap #include sys/mman.h void *mmap(void *addr, size_t length, int prot, int flags, int fd, off_t offset); One of the uses of mmap (shared file mapping/private file mapping) is to access files demo #include sys/mman.h #in

[Microcontroller]

Popular Resources
Popular amplifiers