Ordos Jinchen International Commercial Center, located in the south of Ordos Kangbashi New District Municipal Government, is the first modern concept super-large shopping center in Ordos.
The total construction area is 89,123 square meters, with five floors above ground and two floors underground. The project is located in the core area of Kangbashi New District, surrounded by residential areas on all sides, and close to the four major cultural buildings of the Art Center, National Theater, Library, and Museum. It is a landmark building in Kangbashi New District.
Considering the overall harmony between the commercial center and the surrounding art centers, theaters, libraries and other cultural buildings, and the requirements of environmental protection and energy saving of lighting, the exterior wall lighting of the commercial center uses a large number of LED light sources, creating a compact and varied but unobtrusive lighting effect in the open field of vision.
AD Lighting adheres to its technological advantages in the field of architectural lighting and continuously launches multiple series of LED application products. Among them, the Sinar LED square wall lamp has been widely used in many construction projects.
As an outdoor wall lamp, AD Sinar LED square wall lamp has a lamp body made of extruded aluminum. The light source is installed in the lamp cover, which enhances the waterproof performance and has a protection level of IP66.
All of the Sinar square LED wall lamps on the entire facade are controlled by the DMN-LED lighting network control system developed by AD. During the project construction, a centralized power supply with a rated power of 220/230VAV is used.
DMN—LED lighting network control system adopts RS-485 network communication, baud rate BPS=1200-9600, the system adopts point-to-point communication mode, the network communication bandwidth occupancy rate is low, ensuring the long-term operation reliability of the entire set of lamps.
Previous article:my country starts energy-saving certification for LED lighting products
Next article:Working principle and technical characteristics of high frequency electrodeless lamp
Recommended ReadingLatest update time:2024-11-16 19:44
- Popular Resources
- Popular amplifiers
- MathWorks and NXP Collaborate to Launch Model-Based Design Toolbox for Battery Management Systems
- STMicroelectronics' advanced galvanically isolated gate driver STGAP3S provides flexible protection for IGBTs and SiC MOSFETs
- New diaphragm-free solid-state lithium battery technology is launched: the distance between the positive and negative electrodes is less than 0.000001 meters
- [“Source” Observe the Autumn Series] Application and testing of the next generation of semiconductor gallium oxide device photodetectors
- 采用自主设计封装,绝缘电阻显著提高!ROHM开发出更高电压xEV系统的SiC肖特基势垒二极管
- Will GaN replace SiC? PI's disruptive 1700V InnoMux2 is here to demonstrate
- From Isolation to the Third and a Half Generation: Understanding Naxinwei's Gate Driver IC in One Article
- The appeal of 48 V technology: importance, benefits and key factors in system-level applications
- Important breakthrough in recycling of used lithium-ion batteries
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- For example, for a 24-bit ADC, we only know the accuracy. How is the sampling speed/sampling rate of the microcontroller calculated?
- #Idle Market#Selling Texas Instruments Tiva C Series TM4C123G Development Board
- A Preliminary Study on the Working Principle of PCIe
- FAQ_ How to set up the allocation of memory to the dynamic memory area
- 【Running posture training shoes】No.003-Data collection and real-time display
- [Open Source] FPGA-based binocular camera adapter board
- 13. "Wanli" Raspberry Pi Car - Accessories Preparation
- [Survey] What is the most convenient tool for PCB design?
- stm32f103rct6 serial port 485 can receive, send error
- How to achieve constant temperature between 2 and 8 degrees