High flexibility for high power density and performance demands: Infineon expands 1200 V 62 mm IGBT7 portfolio with new current rating modules
[Munich, Germany, August 4, 2023] Infineon Technologies AG launches a portfolio of 62 mm half-bridge and common-emitter modules equipped with 1200 V TRENCHSTOP™ IGBT7 chips. The maximum current specification of the module is up to 800 A, expanding Infineon's product portfolio with a mature 62 mm package design. The increase in current output capability not only provides system designers with maximum flexibility when designing solutions with higher rated currents, but also provides higher power density and better electrical performance. The new module is specially developed to meet the needs of centralized solar inverters as well as industrial motor drives and uninterruptible power supplies (UPS). In addition, it is also widely used in electric vehicle charging piles, energy storage systems (ESS) and other new industrial applications.
Based on the new micro-groove technology, the static losses of the 62 mm module series with 1200 V TRENCHSTOP IGBT7 chips are significantly lower than those of modules with IGBT4 chipsets. These features significantly reduce the losses in the application, especially in industrial motor drives operating at medium switching frequencies. The oscillation behavior and controllability of the IGBTs have also been improved. In addition, the maximum overload junction temperature of the new power modules is 175°C.
The robust nickel-plated copper baseplate and nut main terminals ensure sufficient mechanical strength for the 62 mm module package. The main terminals are located in the center of the package and are ideal for parallel circuits and three-level topology configurations due to their low DC link connection inductance. The standard package design and dimensions make the series compatible with previous module versions. In addition, all modules can use the proven pre-applied thermal interface material (TIM) from semiconductor technology company Infineon.
Availability
The 1200 V TRENCHSTOP IGBT7 62mm portfolio is available for order now. Models with pre-applied thermal interface material will be available soon.
Previous article:Vicor to demonstrate high-performance modular power conversion solutions for xEV at WCX 2023
Next article:ROHM launches 650V GaN power stage IC with integrated driver and power tube
Recommended ReadingLatest update time:2024-11-16 11:27
- Popular Resources
- Popular amplifiers
- Practical Development of Automotive FlexRay Bus System (Written by Wu Baoxin, Guo Yonghong, Cao Yi, Zhao Dongyang, etc.)
- Principles and Applications of Automotive Embedded Microcontrollers: Infineon XC2000 Family MCUs
- Automotive integrated circuits and their applications
- Research on CAN Gateway Based on Infineon MCU
- MathWorks and NXP Collaborate to Launch Model-Based Design Toolbox for Battery Management Systems
- STMicroelectronics' advanced galvanically isolated gate driver STGAP3S provides flexible protection for IGBTs and SiC MOSFETs
- New diaphragm-free solid-state lithium battery technology is launched: the distance between the positive and negative electrodes is less than 0.000001 meters
- [“Source” Observe the Autumn Series] Application and testing of the next generation of semiconductor gallium oxide device photodetectors
- 采用自主设计封装,绝缘电阻显著提高!ROHM开发出更高电压xEV系统的SiC肖特基势垒二极管
- Will GaN replace SiC? PI's disruptive 1700V InnoMux2 is here to demonstrate
- From Isolation to the Third and a Half Generation: Understanding Naxinwei's Gate Driver IC in One Article
- The appeal of 48 V technology: importance, benefits and key factors in system-level applications
- Important breakthrough in recycling of used lithium-ion batteries
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- 【STM32WB55 Review】_02_Experience the power of ultra-low power consumption
- [Solved] How is the opencv library of dsp generated in the official data of DM8148
- Radar system basic design
- 【TI recommended course】#What is I2C design tool? #
- What is the relationship between the microcontroller baud rate, crystal oscillator and main frequency?
- Bluetooth low energy dimmable smart lighting solution
- TMS320C6000 Basic Learning (4) - cmd file analysis
- A summary of the most downloaded electronic technical materials this week (2020.5.10~15)
- GaN Finishing Station 2
- A DCDC board, originally powered by a battery, does not work when it is powered by a switching power supply. Why?