Bourns Launches Fully Sealed Power Inductors Qualified to AEC-Q200 Standards to Meet High Current Density and High Temperature Requirements
The SRP6530A sealed power inductor is characterized over the -55° to +155°C operating temperature range.
Maintains the characteristics of high saturation current, low radiation and low buzzing noise
2021年8月16日 - 美商柏恩Bourns全球知名电子元件领导制造供应商,今日发布最新SRP6530A密封式功率电感器系列,目的在满足各种应用中的高电流密度和高温要求。这些符合 AEC-Q200 标准的电感器乃採用金属合金粉末磁芯密封式结构,即使在-55°至+155°C的工作温度范围亦可提供低磁场辐射、低蜂鸣噪声。这些特点成为需要更高性能的消费性、工业和电信电子应用中的电磁干扰(EMI)过滤和电源管理解决方案的理想选择。
Bourns' new inductors offer low DC resistance, and their uniquely formulated metal alloy powder core and molded structure provide high saturation currents of 7 to 70 A in the 0.1–10 μH inductance range, which enhances their low-loss characteristics. In addition, Bourns uses high-temperature grade materials with 50 VDC ratings and high rated currents up to 34 A, which provide excellent inductance temperature stability even in a wide range of operating temperatures.
Bourns® SRP6530A Sealed Power Inductor Series is now available and all series are RoHS compliant* and halogen-free**.
*RoHS Directive 2015/863 of March 31, 2015 and Annexes.
**Bourns products meet the “halogen-free” requirement if (a) the bromine content is 900 ppm or less, (b) the chlorine content is 900 ppm or less, and (c) the sum of the bromine and chlorine content is 1500 ppm or less.
About Bourns
Bourns - A leading manufacturer and supplier of electronic components, the company is headquartered in Riverside, California, USA. Its products include: position and speed sensors, circuit protection solutions, magnetic components, microelectronic modules, panel controllers and resistor products. The service industries cover automotive, industrial, consumer, communications, non-critical life support medical (low/medium risk) audio and various other markets.
Bourns® and the Bourns logo are registered trademarks of Bourns and may be used only with permission from Bourns and proper acknowledgement. Other names and brands listed are trademarks or registered trademarks of their respective owners.
†Bourns® products are not intended for use in “life saving,” “life critical,” or “life sustaining” applications, or in any other application in which the failure of the Bourns® product could lead to personal injury or death.
Previous article:High-power thyristor parameter analysis: forward characteristics
Next article:element14 now sells TE Connectivity's Intercontinental circular connectors
Recommended ReadingLatest update time:2024-11-16 13:02
- MathWorks and NXP Collaborate to Launch Model-Based Design Toolbox for Battery Management Systems
- STMicroelectronics' advanced galvanically isolated gate driver STGAP3S provides flexible protection for IGBTs and SiC MOSFETs
- New diaphragm-free solid-state lithium battery technology is launched: the distance between the positive and negative electrodes is less than 0.000001 meters
- [“Source” Observe the Autumn Series] Application and testing of the next generation of semiconductor gallium oxide device photodetectors
- 采用自主设计封装,绝缘电阻显著提高!ROHM开发出更高电压xEV系统的SiC肖特基势垒二极管
- Will GaN replace SiC? PI's disruptive 1700V InnoMux2 is here to demonstrate
- From Isolation to the Third and a Half Generation: Understanding Naxinwei's Gate Driver IC in One Article
- The appeal of 48 V technology: importance, benefits and key factors in system-level applications
- Important breakthrough in recycling of used lithium-ion batteries
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- Looking forward to the review of the Yatli series~
- Common problems and solutions in CCS compilation
- C language pointer to array element
- Dual-core intelligent electro-hydraulic servo controller using DSP and STM32
- Please help me find out what models these devices are.
- The secrets of three methods of cross-clock domain processing.pdf
- Dynamic macro keyboard with E-ink display
- EEWORLD University - Demonstrating Jailhouse Hypervisor Virtualization on Sitara AM572x Reference Design
- How to filter out the AC component noise mixed in the 24V DC?
- In C language, please remember to initialize local variables