What issues should be considered in the design and installation of outdoor LED large screens?

Publisher:mancozcLatest update time:2012-04-22 Source: OFweek Keywords:LED Reading articles on mobile phones Scan QR code
Read articles on your mobile phone anytime, anywhere
  • The main problems of outdoor screens are as follows:

    (1) Display screens are installed outdoors and are often exposed to the sun, rain, wind and dust, and have a harsh working environment. Electronic equipment that is wet or severely damp can cause short circuits or even fires, leading to malfunctions or even fires, causing losses;

    (2) The display screen may be attacked by strong electricity and strong magnetic fields caused by lightning;

    (3) The ambient temperature changes greatly. The display screen will generate a certain amount of heat when it is working. If the ambient temperature is too high and the heat dissipation is poor, the integrated circuit may not work properly or even burn out, making the display system unable to work properly;

    (4) The audience is wide, and the viewing distance and field of view are required to be long; the ambient light changes greatly, especially the possibility of being exposed to direct sunlight.

    In view of the above special requirements, outdoor display screens must:

    (1) The screen body and the joints between the screen body and the building must be strictly waterproof and leakproof; the screen body must have good drainage measures so that water can be discharged smoothly in case of accumulation;

    (2) Install lightning protection devices on the display screen and buildings. The display screen body and shell should be well grounded, with a grounding resistance of less than 3 ohms, so that the large current caused by lightning can be discharged in time;

    (3) Install ventilation equipment to cool down the screen so that the internal temperature is between -10℃ and 40℃. Install an axial fan on the upper back of the screen to discharge heat;

    (4) Use industrial-grade integrated circuit chips with an operating temperature between -40°C and 80°C to prevent the display screen from failing to start due to low temperatures in winter;

    (5) In order to ensure long-distance visibility under strong ambient light, ultra-high brightness LEDs must be used;

    (6) The display medium uses a new wide-angle tube with a wide viewing angle, pure and consistent colors, and a service life of more than 100,000 hours. The outer package of the display medium is the most popular square cylinder with a shielding edge, silicone seal, and non-metallic assembly; its appearance is exquisite and beautiful, sturdy and durable, and has the "five protection" characteristics of anti-direct sunlight, dustproof, waterproof, high temperature, and circuit short circuit.

  • Keywords:LED Reference address:What issues should be considered in the design and installation of outdoor LED large screens?

    Previous article:Features of LED dot matrix display
    Next article:51 single chip microcomputer 8*8 dot matrix LED display principle and program

    Recommended ReadingLatest update time:2024-11-16 15:55

    51 single chip microcomputer 16*16LED dot matrix scrolling display
    * Function: LED 16*16 dot matrix scrolling display Note: 74LS154 is used to send data, and P0 and P2 ports are used to select columns. The best tool for viewing this program is preferably one with labels and syntax coloring, Keil or UltraEdit is recommended   Lazy Tips: How to change the display content to what you wa
    [Microcontroller]
    51 single chip microcomputer 16*16LED dot matrix scrolling display
    Analysis of relevant technologies to improve the display effect of LED display
    1. Introduction In recent years, the application of full-color LED display screens in sports venues, road traffic, advertising, leasing, etc. has shown a rapid growth trend. According to the forecast of the international market overview of LED display screen products by Stanford Resources in the Uni
    [Power Management]
    Analysis of relevant technologies to improve the display effect of LED display
    RT8488 LED driver application circuit and package
    The RT8488 is a 6-CH LED driver controller that delivers well matched LED current to each channel of LED string. Application • Building and Street Lighting • LED TV Backlight • LED Monitor Backlight • Industrial Display Backlight   Pin Configurations   WQFN-32L 5x5 SSOP-30   Typical Applications Circuit
    [Power Management]
    RT8488 LED driver application circuit and package
    Diodes Corporation launches boost/SEPIC controller to achieve 50kHz LED wide PWM dimming in automotive lighting product applications
    Diodes Corporation (Diodes) has launched a boost/single-ended primary inductor converter (SEPIC) controller suitable for various automotive LED product applications. The AL8853AQ is an automotive-qualified, highly integrated boost/SEPIC controller that reduces the bill of materials (BOM) of automotive LED product app
    [Automotive Electronics]
    Diodes Corporation launches boost/SEPIC controller to achieve 50kHz LED wide PWM dimming in automotive lighting product applications
    High-power LED packaging technology and development trend
       The main purpose of LED packaging is to achieve electrical interconnection and mechanical contact between the LED chip and the external circuit, protect the LED from external impacts such as mechanical, thermal, and moisture, meet optical requirements, improve light output efficiency, meet chip heat dissipati
    [Power Management]
    Design principle of LED outline display controller based on single chip microcomputer
    According to the structural characteristics of LED contour display control, a display controller based on STC single chip is designed. The system control uses STC11/12 series single chip as the control processor, with peripheral circuits, and uses 485 interface to realize master-slave remote control. The color band
    [Microcontroller]
    Design principle of LED outline display controller based on single chip microcomputer
    Engineers explain: Reasons for dead lamp beads in T8 LED lamp withstand voltage test
    Should T8LED lamps be subjected to a withstand voltage test before they are aged after manufacturing? Some manufacturers skip this step and ship them directly after aging. Why? The answer is that the withstand voltage test will kill the lamp beads. Expanding the concept, a considerable number of people in the entire L
    [Power Management]
    Engineers explain: Reasons for dead lamp beads in T8 LED lamp withstand voltage test
    How to drive high-power LEDs
    Introduction Since its introduction in the early 1960s, light-emitting diodes (LEDs) have been used in many semiconductor devices. From the introduction of the first LED to the present, LED technology has made great technological progress. The use of gallium nitride (InGaN) and indium gallium aluminum phosphide
    [Power Management]
    How to drive high-power LEDs
    Latest Power Management Articles
    Change More Related Popular Components

    EEWorld
    subscription
    account

    EEWorld
    service
    account

    Automotive
    development
    circle

    About Us Customer Service Contact Information Datasheet Sitemap LatestNews


    Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

    Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号