There are several benefits of using MCU for electrical products. Take the food processor as an example. First, it protects the motor. The most feared thing about motor products is long-term idling, which causes high temperature and fire. If MCU is used, the power supply can be immediately disconnected when idling occurs, thereby protecting the motor from damage and avoiding fire. Second, it starts the motor slowly: set the program to start the motor in PWM mode to avoid sudden high-speed operation and extend the service life of the motor. Third, it avoids unnecessary energy loss: the traditional food processor startup method consumes unnecessary energy. Using PWM startup can make the energy used in the appropriate place and avoid wasting electricity.
Remote Control Solution
MDTMCUSolution(MDT10P432)
MDT10P432 Specifications
8BitMicro-Controller
OnchipROMsize:512words
InternalRAMsize:28Bytes
Operating voltage: 2.0V~6.0V
InternalRC455KHz
Autodetectexternalcrystalonboard.
Option used PBONMOS to replace BJT.
Power on Reset.
SOP16/18/20.
Keyboards use a dot matrix arrangement, which is more power-efficient than a trapezoidal arrangement, reducing battery consumption and harm to nature.
MDT10P432 Application Circuit
At the end of the 2007 EU Spring Summit, an agreement was reached that all incandescent lamps used in households would be replaced by energy-saving lamps before 2009; Australia and the United States also announced that they would gradually ban the use of incandescent lamps between 2010 and 2020, and all incandescent lamps would be replaced by energy-saving lamps.
With global warming and increasing energy shortage, energy conservation and consumption reduction has become an important issue worldwide. As a major producer of energy-saving lamps, 80% of its energy-saving lamps are exported to the European and American markets. We will introduce energy-saving lamps in the future, hoping to help everyone understand energy-saving lamps and do our best to save energy, reduce consumption, protect the environment, and build a harmonious society.
Five benefits of energy-saving lamps
1. High luminous efficiency: high efficiency and energy saving, huge benefits; under the condition of unchanged illumination, a 5W energy-saving lamp can directly replace a 25W incandescent lamp; an 85W high-power energy-saving lamp can replace a 500W incandescent lamp or a 250W mercury lamp, and the energy saving rate reaches 50%-80%.
2 Wide operating voltage: It can be instantly activated and work normally within the range of 100V-265V, with little pollution to the power grid.
3. Long service life: Under normal working conditions, it can reach 8000-10000 hours, which is 6-8 times the life of incandescent lamp and iodine lamp; compared with mercury lamp and sodium lamp, its service life is 2-3 times longer.
4. Good color rendering and activation performance: It completely solves the shortcomings of long activation and power-off reactivation time of mercury lamps, high-pressure sodium lamps and metal halide lamps.
5. Low temperature rise during normal operation: about 50℃ lower than mercury lamps and high-pressure sodium lamps.
Mains Dimmable Energy Saving Lamp Solution
Dimming energy-saving lamp application circuit
During the transmission of electricity, at least 10% of the electricity is wasted. In order to save energy, energy is now continuously produced in a "healthy" way. However, as long as it is transmitted using the traditional power system, this unnecessary waste cannot be avoided.
According to the forecast of the US Energy Information Administration, from 2005 to 2030, the annual power generation of developed countries will increase by 1-3%, while that of poor countries will increase even faster, with an average annual increase of 4%. The old power grid system obviously does not meet the requirements of an ecological society. In such a context, smart grids are beginning to be favored by more and more countries.
In the construction of smart grid system, the most important thing is to introduce "smart meters", which can record the real-time electricity consumption and transmit the information back to the power company. In recent years, as the cost of smart meters has become lower and lower, the idea of their widespread installation in ordinary households has become possible.
People can generate energy through solar devices. In addition to using it for their own homes, they can also generate excess energy and sell it back to the power system. They can also monitor the power consumption of home appliances in real time through iPhones, and reduce power consumption during peak hours.
According to statistics from ABI Research, there are 76 million smart meters installed worldwide, and this number is expected to grow to 155 million in 2013. In this regard, Enel, the largest energy company in Italy, is at the forefront. Since 2001, Enel has installed more than 30 million smart meters for its users.
With the continuous improvement of living standards and the continuous development of science and technology, people's functional requirements for "smart meters" will not stop at basic functions such as prepayment, accurate measurement, and data statistics. They are more looking forward to the emergence of highly intelligent "electricity meters" so that power companies can adjust at any time according to the demand and supply of electricity. Compared with the power company's method of large-scale power outages, this adjustment method is obviously more reasonable.
This is both a golden opportunity and a huge challenge for instrumentation companies. It can be said that the electric energy meter industry has entered a new development space.
MDT Electricity Meter Solution
Meter Communication Solution
Previous article:60V/50A high power adjustable power supply based on phase-shifted full-bridge
Next article:RF CO2 laser power supply types and principles
Recommended ReadingLatest update time:2024-11-16 23:47
- Popular Resources
- Popular amplifiers
- Wireless Sensor Network Technology and Applications (Edited by Mou Si, Yin Hong, and Su Xing)
- Modern Electronic Technology Training Course (Edited by Yao Youfeng)
- Modern arc welding power supply and its control
- Small AC Servo Motor Control Circuit Design (by Masaru Ishijima; translated by Xue Liang and Zhu Jianjun, by Masaru Ishijima, Xue Liang, and Zhu Jianjun)
- MathWorks and NXP Collaborate to Launch Model-Based Design Toolbox for Battery Management Systems
- STMicroelectronics' advanced galvanically isolated gate driver STGAP3S provides flexible protection for IGBTs and SiC MOSFETs
- New diaphragm-free solid-state lithium battery technology is launched: the distance between the positive and negative electrodes is less than 0.000001 meters
- [“Source” Observe the Autumn Series] Application and testing of the next generation of semiconductor gallium oxide device photodetectors
- 采用自主设计封装,绝缘电阻显著提高!ROHM开发出更高电压xEV系统的SiC肖特基势垒二极管
- Will GaN replace SiC? PI's disruptive 1700V InnoMux2 is here to demonstrate
- From Isolation to the Third and a Half Generation: Understanding Naxinwei's Gate Driver IC in One Article
- The appeal of 48 V technology: importance, benefits and key factors in system-level applications
- Important breakthrough in recycling of used lithium-ion batteries
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- Discussing STM32H750 Part 4 (Briefly Talking about CANFD Part 1)
- RK903 & RK901 & AP6xxx Series WiFi Module Configuration
- EEWORLD University Hall----Design considerations for a robust interface between J6 and vehicle displays via FPD-Link
- 5 Tips for Converting Embedded Hardware to Software
- Pearl River Delta: The third pole of China's semiconductor industry?
- [Analog Electronics Course Selection Test] + User Experience
- ECG 12-lead
- What is the relationship between baud rate and USB or network bit rate? For example, 900 (Baud, symbol/s) is used in some places...
- IoT indoor environment monitor based on ESP32-S2-Kaluga-1] Reading svm40 sensor module data
- The difference between FPGA and DSP (rough summary)