TLC072IDGNG4

Basic information of TLC072IDGNG4 amplifier:

TLC072IDGNG4 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are GREEN, PLASTIC, MSOP-8

TLC072IDGNG4 amplifier core information:

The TLC072IDGNG4 has a minimum operating temperature of -40 °C and a maximum operating temperature of 125 °C. Its peak reflow temperature is 260°C and its maximum average bias current is 0.0007 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of TLC072IDGNG4 is 16 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TLC072IDGNG4 gain becomes 0.707 times the low-frequency gain is 10000 kHz.

The nominal supply voltage of the TLC072IDGNG4 is 5 V. The upper limit of its supply voltage is 17. The input offset voltage of VTLC072IDGNG4 is 3000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TLC072IDGNG4:

The width of TLC072IDGNG4 is: 3 mm, the length is 3 mm. TLC072IDGNG4 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8

TLC072IDGNG4 amplifier additional information:

Its temperature grade is: AUTOMOTIVE. And its humidity sensitivity level is: 1. TLC072IDGNG4 is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: S-PDSO-G8.

其对应的的JESD-609代码为：e4。TLC072IDGNG4的封装代码是：HTSSOP。TLC072IDGNG4封装的材料多为PLASTIC/EPOXY。而其封装形状为SQUARE。TLC072IDGNG4封装引脚的形式有：SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH。

其端子形式有：GULL WING。座面最大高度为1.07 mm。